Poulan PP18542 owner manual To Replace Mower Blade Drive Belt See Fig, To Check Brake

Page 22

SERVICE AND ADJUSTMENTS

TO REPLACE MOWER BLADE DRIVE BELT (See Fig. 29)

The mower blade drive belt may be replaced without tools. Park the tractor on level surface. Engage parking brake.

BELT REMOVAL -

Remove mower from tractor (See “TO REMOVE MOWER” in this section of manual).

Work belt off both mandrel pulleys and idler pulleys.

Pull belt away from mower.

BELT INSTALLATION -

Work belt around both mandrel pulleys and idler pul- leys.

Make sure belt is in all pulley grooves and inside all belt guides.

Install mower (See "To Install Mower" in this section of manual).

IDLER

PULLEYS

MANDREL

PULLEY

MANDREL

PULLEY

Fig. 29

TO CHECK BRAKE

If tractor requires more than five (5) feet to stop at highest speed in highest gear on a level, dry concrete or paved surface, then brake must be serviced.

You may also check brake by:

Park tractor on a level, dry concrete or paved surface, depress brake pedal all the way down and engage parking brake.

Place gear shift lever in neutral (N) position.

The rear wheels must lock and skid when you try to manu- ally push the tractor forward. If the rear wheels rotate, then the brake needs to be serviced. Contact a qualified service center.

TO REPLACE MOTION BELT DRIVE (See Fig. 30)

Park the tractor on level surface. Engage parking brake. For assistance, there is a belt installation guide decal on bottom side of left footrest.

22

BELT REMOVAL

Remove mower (See “TO REMOVE MOWER” in this section of manual).

NOTE: Observe entire motion drive belt and position of all belt guides and keepers.

Remove belt from stationary idler (A) and clutching idler (B).

Remove belt from centerspan idler (C).

Pull belt slack toward rear of tractor. Carefully remove belt upwards from transmission input pulley and over cooling fan blades (D).

Remove belt downward from engine pulley (E).

Slide belt toward rear of tractor, off the steering plate

(F) and remove from tractor.

BELT INSTALLATION -

Install new belt from tractor rear to front, over the steer- ing plate (F) and above clutch brake pedal shaft (G).

Pull belt toward front of tractor and roll belt onto engine pulley (E).

Pull belt toward rear of tractor. Carefully work belt down around transmission cooling fan and onto the input pulley (D). Be sure belt is inside the belt keeper.

Install belt on centerspan idler (C).

Install belt through stationary idler (A) and clutching idler (B).

Make sure belt is in all pulley grooves and inside all belt guides and keepers.

Install mower (See “TO INSTALL MOWER” in this section of manual).

E

F

A

 

B

G

C

 

D

02952

Fig. 30

Image 22
Contents PP18542 General Operation Safety RulesSafe Operation Practices for Ride-On Mowers II. Slope OperationIII. Children ServiceGeneral Service IV. TowingTable of Contents Unassembled Parts To Remove Tractor from Carton AssemblyTools Required for Assembly Before Removing Tractor from SkidInstall Seat See Figs a and 2B Check Battery See FigCheck for Proper Position of ALL Belts Check Tire PressureCheck Deck Levelness Check Brake SystemOperation Know Your Tractor Ground Drive HOW to USE Your TractorMower Blades EngineUsing the Reverse Operation System To Adjust Mower Cutting Height See FigTo Adjust Gauge Wheels See Fig Reverse Operation System ROS See FigBefore Starting the Engine Mowing Tips To Start Engine See FigMaintenance Lubrication ChartCheck Operator Presence System BatteryTractor Check Reverse Operation ROS SYS- TEMEngine Cleaning IN-LINE Fuel Filter See FigTo Install Mower See Figs Service and AdjustmentsTo Remove Mower See Fig Install belt on engine pulley M, in belt keepers G Visual SIDE-TO-SIDE Adjustment See Fig To Level MowerTo Check Brake To Replace Mower Blade Drive Belt See FigTo Replace Motion Belt Drive See Fig To Start Engine with a Weak Battery See Fig Transaxle Gear Shift Lever NEUTRAL- Adjustment See FigTo Adjust Steering Wheel Alignment Front Wheel TOE-IN/CAMBERTo Replace Headlight Bulb To Adjust Throttle Control CableTo Adjust Carburetor Interlocks and RelaysEngine OIL StorageFuel System CylindersTroubleshooting Points Problem Cause CorrectionEngine dies when Service Notes Service Notes Service Notes Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAX

PP18542 specifications

The Poulan PP18542 is a powerful and efficient lawn mower designed for residential yard care, delivering impressive performance and reliability. Equipped with a robust 18.5 horsepower Briggs & Stratton engine, this riding mower ensures easy starts and steady power, making it ideal for tackling a variety of lawn sizes and terrains.

One of the standout features of the PP18542 is its 42-inch cutting deck, which allows for quick and efficient mowing. The wide cutting path reduces the number of passes needed to cover a lawn, saving both time and effort. The mower offers an adjustable cutting height feature, providing users with the flexibility to choose from six different height settings, accommodating the specific needs of their grass type and preference.

The Poulan PP18542 utilizes a hydrostatic transmission system, which offers seamless speed control and is incredibly user-friendly. This technology allows for smooth acceleration and deceleration without the need for shifting gears, making it a great choice for users of all skill levels. The responsive driving controls ensure ease of maneuverability around obstacles, improving overall efficiency during lawn maintenance.

Comfort is also a priority in the design of the PP18542. The mower comes equipped with a comfortable high-back seat that provides support during extended use. The strategically placed ergonomic steering wheel and foot pedal controls enhance the user experience, reducing fatigue even during longer mowing sessions.

Durability and maintenance are key considerations for the Poulan PP18542. The mower features a rugged frame and heavy-duty construction, ensuring it can withstand the rigors of regular use. Routine maintenance is simplified thanks to the easy-access oil filter and an integrated deck wash system, which allows users to clean the underside of the cutting deck without needing special tools.

In addition to its core features, the PP18542 is compatible with various accessories and attachments, enabling users to expand its functionality beyond mowing. Options include mulch kits, baggers, and towing trailers, making it a versatile tool for yard care.

Overall, the Poulan PP18542 combines power, comfort, and durability, making it an excellent choice for homeowners seeking a reliable riding mower to maintain their lawns efficiently.