Poulan PP18542 Check Tire Pressure, Check Deck Levelness, Check for Proper Position of ALL Belts

Page 8

ASSEMBLY

TO DRIVE TRACTOR OFF SKID (See Op- eration section for location and function of controls)

•Be sure all the above assembly steps have been com- pleted.

•Check engine oil level and fill fuel tank with gasoline.

•Sit on seat in operating position, depress clutch/brake pedal and set the parking brake.

•Place gear shift lever in neutral (N) position.

•Press lift lever plunger and raise attachment lift lever to its highest position.

•Remove key from bag and start the engine (see "TO START ENGINE" in the Operation section of this manual). After engine has started, move throttle control to idle (slow) position.

•Depress clutch/brake pedal into full "BRAKE" position and hold. Move gearshift lever to 1st gear.

•Slowly release clutch/brake pedal and slowly drive tractor off skid.

•Apply brake to stop tractor, set parking brake and place gearshift lever in neutral position.

•Turn ignition key to "STOP" position.

Continue with the instructions that follow.

CHECK TIRE PRESSURE

The tires on your tractor were overinflated at the factory for shipping purposes. Correct tire pressure is important for best cutting performance.

•Reduce tire pressure to PSI shown on tires.

CHECK DECK LEVELNESS

For best cutting results, mower housing should be prop- erly leveled. See “TO LEVEL MOWER HOUSING” in the Service and Adjustments section of this manual.

CHECK FOR PROPER POSITION OF ALL BELTS

See the Figures that are shown for replacing motion and mower blade drive belts in the Service and Adjustments section of this manual. Verify that the belts are routed correctly.

CHECK BRAKE SYSTEM

After you learn how to operate your tractor, check to see that the brake is operating properly. See “TO CHECK BRAKE” in the Service and Adjustments section of this manual.

✓checklist

BEFORE YOU OPERATE YOUR NEW TRACTOR, WE WISH TO ASSURE THAT YOU RECEIVE THE BEST PERFORMANCE AND SATISFACTION FROM THIS QUALITY PRODUCT.

PLEASE REVIEW THE FOLLOWING CHECKLIST:

✓All assembly instructions have been completed.

✓No remaining loose parts in carton.

✓Battery is properly prepared and charged.

✓Seat is adjusted comfortably and tightened securely.

✓All tires are properly inflated. (For shipping purposes, the tires were overinflated at the factory).

✓Be sure mower deck is properly leveled side-to-side/ front-to-rear for best cutting results. (Tires must be properly inflated for leveling).

✓Check mower and drive belts. Be sure they are routed properly around pulleys and inside all belt keepers.

✓Check wiring. See that all connections are still secure and wires are properly clamped.

WHILE LEARNING HOW TO USE YOUR TRACTOR, PAY EXTRA ATTENTION TO THE FOLLOWING IMPORTANT ITEMS:

✓Engine oil is at proper level.

✓Fuel tank is filled with fresh, clean, regular unleaded gasoline.

✓Become familiar with all controls, their location and function. Operate them before you start the engine.

✓Be sure brake system is in safe operating condition.

✓Be sure Operator Presence System and Reverse Op- eration System (ROS) are working properly (See the Operation and Maintenance sections in this manual).

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents PP18542 Safety Rules Safe Operation Practices for Ride-On MowersGeneral Operation II. Slope OperationService General ServiceIII. Children IV. TowingTable of Contents Unassembled Parts Assembly Tools Required for AssemblyTo Remove Tractor from Carton Before Removing Tractor from SkidInstall Seat See Figs a and 2B Check Battery See FigCheck Tire Pressure Check Deck LevelnessCheck for Proper Position of ALL Belts Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor Mower BladesGround Drive EngineTo Adjust Mower Cutting Height See Fig To Adjust Gauge Wheels See FigUsing the Reverse Operation System Reverse Operation System ROS See FigBefore Starting the Engine Mowing Tips To Start Engine See FigMaintenance Lubrication ChartBattery TractorCheck Operator Presence System Check Reverse Operation ROS SYS- TEMEngine Cleaning IN-LINE Fuel Filter See FigTo Remove Mower See Fig Service and AdjustmentsTo Install Mower See Figs Install belt on engine pulley M, in belt keepers G Visual SIDE-TO-SIDE Adjustment See Fig To Level MowerTo Replace Motion Belt Drive See Fig To Replace Mower Blade Drive Belt See FigTo Check Brake Transaxle Gear Shift Lever NEUTRAL- Adjustment See Fig To Adjust Steering Wheel AlignmentTo Start Engine with a Weak Battery See Fig Front Wheel TOE-IN/CAMBERTo Adjust Throttle Control Cable To Adjust CarburetorTo Replace Headlight Bulb Interlocks and RelaysStorage Fuel SystemEngine OIL CylindersTroubleshooting Points Problem Cause CorrectionEngine dies when Service Notes Service Notes Service Notes Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAX

PP18542 specifications

The Poulan PP18542 is a powerful and efficient lawn mower designed for residential yard care, delivering impressive performance and reliability. Equipped with a robust 18.5 horsepower Briggs & Stratton engine, this riding mower ensures easy starts and steady power, making it ideal for tackling a variety of lawn sizes and terrains.

One of the standout features of the PP18542 is its 42-inch cutting deck, which allows for quick and efficient mowing. The wide cutting path reduces the number of passes needed to cover a lawn, saving both time and effort. The mower offers an adjustable cutting height feature, providing users with the flexibility to choose from six different height settings, accommodating the specific needs of their grass type and preference.

The Poulan PP18542 utilizes a hydrostatic transmission system, which offers seamless speed control and is incredibly user-friendly. This technology allows for smooth acceleration and deceleration without the need for shifting gears, making it a great choice for users of all skill levels. The responsive driving controls ensure ease of maneuverability around obstacles, improving overall efficiency during lawn maintenance.

Comfort is also a priority in the design of the PP18542. The mower comes equipped with a comfortable high-back seat that provides support during extended use. The strategically placed ergonomic steering wheel and foot pedal controls enhance the user experience, reducing fatigue even during longer mowing sessions.

Durability and maintenance are key considerations for the Poulan PP18542. The mower features a rugged frame and heavy-duty construction, ensuring it can withstand the rigors of regular use. Routine maintenance is simplified thanks to the easy-access oil filter and an integrated deck wash system, which allows users to clean the underside of the cutting deck without needing special tools.

In addition to its core features, the PP18542 is compatible with various accessories and attachments, enabling users to expand its functionality beyond mowing. Options include mulch kits, baggers, and towing trailers, making it a versatile tool for yard care.

Overall, the Poulan PP18542 combines power, comfort, and durability, making it an excellent choice for homeowners seeking a reliable riding mower to maintain their lawns efficiently.
Top Page Image Contents