OPERATION
KNOW YOUR EDGER ATTACHMENT
READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR EDG- ER ATTACHMENT. Compare the illustrations with your attachment to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference.
Depth Adjustment Knob | Hanger | |
|
| |
| Shaft | |
| Blade Shield | |
| Wheel | |
Gearbox |
|
|
| Edger Blade | |
BLADE | DEPTH ADJUSTMENT KNOB | |
The BLADE is designed to cut sod. | The DEPTH ADJUSTMENT KNOB is used | |
| to adjust the wheel for blade cutting depth. | |
|
|
|
OPERATING THE COUPLER
Your powerhead is equipped with a coupler which enables optional attachments to be installed. The optional attachments are:
MODEL:
Cultivator . . . . . . . . . . . . . . . . . PPB2000T Blower . . . . . . . . . . . . . . . . . . . . PPB3000B Brushcutter . . . . . . . . . . . . . . . PPB4000C
WARNING: Always disconnect pow- erhead spark plug (or disconnect powerhead from power source) before removing or instal- ling attachments.
REMOVING ATTACHMENT CAUTION: When removing or installing at- tachments, place the powerhead and attach- ment on a flat surface for stability.
1.Loosen the coupler by turning the knob counterclockwise.
Upper Shaft
Coupler
2.Press and hold the locking/release button. Locking/Release
Button
Coupler | Upper Shaft | |
Lower Attachment | ||
|
3.While securely holding the upper shaft, pull the attachment straight out of the cou- pler.
INSTALLING ATTACHMENT
1.Remove the shaft cap from the attachment (if present) and discard.
2.Position locking/release button of attach- ment into guide recess of upper shaft cou- pler.
Coupler Primary Hole
Guide Recess
Lower Attachment
LOOSEN
Upper Locking/ Attachment
Shaft Release
Button
TIGHTEN Knob
3.Push the attachment into the coupler until the locking/release button snaps into the primary hole.
4.Before using the unit, tighten the knob se- curely by turning clockwise.
6