Poulan PP125 Starting a Warm Engine, Starting a Flooded Engine, Operating the Coupler

Page 9

Primer Bulb

Start Lever

Starter Handle

5.Pull starter rope handle sharply until en- gine starts and runs.

6.Allow unit to run for 10--15 seconds, then fully squeeze the throttle trigger to disen- gage the starting system.

STARTING A WARM ENGINE

1.Move ON/OFF switch to the ON position.

2.Squeeze and hold the throttle trigger. Keep throttle trigger fully squeezed until engine runs smoothly.

3.Pull starter rope sharply while squeezing throttle trigger until engine runs.

NOTE: Normally, the warm starting proce- dure can be used within 5--10 minutes after the unit is turned OFF. If the unit sits for more than 10 minutes without being ran, it will be necessary to start the unit by following the steps under STARTING A COLD ENGINE or following the starting instruction steps shown on the unit.

STARTING A FLOODED ENGINE

Flooded engines can be started by placing the ON/OFF switch in the ON position. Move the start lever to the RUN position and fully squeeze throttle trigger. Pull the starter han- dle repeatedly while squeezing throttle trigger until engine starts and runs. This could re- quire pulling the starter handle many times, depending on how badly the unit is flooded. If the unit still doesn’t start, refer to TROUBLESHOOTING TABLE or call 1-800-554-6723.

OPERATING THE COUPLER

This model is equipped with a coupler which enables optional attachments to be installed. The optional attachments are:

MODEL: Edger . . . . . . . . . . . . . . . . . . . . . PP1000E Cultivator . . . . . . . . . . . . . . . . . . PP2000T Blower . . . . . . . . . . . . . . . . . . . . PP3000B Brushcutter . . . . . . . . . . . . . . . . PP4000C Pruner . . . . . . . . . . . . . . . . . . . . PP5000P

WARNING: Always stop unit and dis- connect spark plug before removing or instal- ling attachments.

REMOVING TRIMMER ATTACH- MENT (OR OTHER OPTIONAL ATTACHMENTS)

CAUTION: When removing or installing at- tachments, place the unit on a flat surface for stability.

1.Loosen the coupler by turning the knob counterclockwise.

 

Upper

Coupler

Shaft

Lower

LOOSEN

 

Attachment

 

TIGHTEN

Knob

2.Press and hold the locking/release button. Locking/Release

Button

Coupler

Upper Shaft

Lower Attachment

 

3.While securely holding the engine and upper shaft, pull the attachment straight out of the coupler.

INSTALLING OPTIONAL ATTACH- MENTS

1.Remove the shaft cap from the attach- ment (if present).

2.Position locking/release button of attach- ment into guide recess of coupler.

3.Push the attachment into the coupler until the locking/release button snaps into the primary hole.

4.Before using the unit, tighten the knob se- curely by turning clockwise.

Coupler Primary Hole

Guide Recess

Locking/

Upper Release Attachment

Shaft Button

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents PP125 Safety Rules Operator SafetyUnit / Maintenance Safety Line Trimmer Safety Fuel SafetyAdditional Safety Rules Edger SafetyBLOWER/VACUUM Safety Brushcutter SafetyCultivator Safety Hedge Trimmer Safety Pole Pruner SafetyCover in place and properly secured Assembly Snow Thrower SafetyInstalling Trimmer ATTACH- Ment Operation Adjusting the HandleAttaching the Shield Know Your UnitHOW to Stop Your Unit ON/OFF SwitchHOW to Start Your Unit Primer BulbStarting a Warm Engine Installing Optional ATTACH- MentsStarting a Flooded Engine Operating the CouplerOperating Position Trimmer Line AdvanceCutting Methods Inspect and Clean Unit and DE- Cals MaintenanceClean AIR Filter Check for Loose Fasteners and PartsInspect Muffler and Spark Arresting Screen Service and AdjustmentsReplace Spark Plug Replacing the LineCarburetor Adjustment Replacing the Cutting HeadRemove the screwdriver Fuel System Seasonal StorageEngine OtherTroubleshooting Table Cause Remedy Ligations The U.S. Environmental Limited Warranty800--554--6723 Service

PP125 specifications

The Poulan PP125 is a lightweight and powerful gas-powered chainsaw designed for both homeowners and professionals looking to tackle various cutting tasks, including pruning, trimming, and light to medium-duty logging. Known for its reliability and efficiency, the PP125 has become a popular choice among users who seek a combination of performance, durability, and ease of use.

One of the standout features of the Poulan PP125 is its robust 25cc two-stroke engine. This engine delivers ample power for cutting through wood while maintaining fuel efficiency. The automatic oiler system ensures that the chain and bar receive continuous lubrication, extending their lifespan and improving cutting performance. The PP125 also comes equipped with a 12-inch bar and chain, ideal for handling smaller projects without sacrificing cutting capability.

The design of the Poulan PP125 emphasizes user comfort and control. Its lightweight build, weighing in at around 8 pounds, makes it easy to maneuver and reduces operator fatigue during extended use. Additionally, the chainsaw features an ergonomic handlebar and a wrap-around front handle, allowing for multiple grip positions and better handling during cutting tasks. Safety features like a chain brake provide added peace of mind by stopping the chain in the event of kickback.

An important technology integrated into the PP125 is the Easy Start system, designed to minimize the effort required to start the engine. This feature reduces the likelihood of flooding and helps ensure quick, reliable starts even in colder weather. The tool-less chain tensioning system allows users to make adjustments easily, ensuring optimal chain tension without the need for additional tools.

The Poulan PP125 is also designed with maintenance in mind. The air filter is easily accessible, facilitating simple cleaning and replacement, which helps keep the engine running smoothly. The chainsaw’s durable construction ensures it can withstand the rigors of outdoor use, making it a dependable choice for both light and moderate cutting tasks.

In summary, the Poulan PP125 offers a well-rounded package for users seeking a dependable chainsaw. Its lightweight design, powerful engine, user-friendly features, and attention to safety make it an excellent option for anyone looking to effectively manage their outdoor cutting needs. Whether you're a seasoned professional or a casual user, the PP125 stands out as a reliable tool in any toolkit.
Top Page Image Contents