DInspect extension cords before each
use and replace if damaged.
DDon’t abuse cord. Never carry unit by the cord or yank extension cord to
disconnect unit.
DTo reduce the possibility of the ex- tension cord disconnecting from the unit during operation, tie the power cord on the unit to the extension cord
as shown in the Extension Cord sec- tion. Insert cord socket on the unit into the extension cord receptacle.
DDo not use unit if the switch does not turn the unit on and off properly. Re- pairs to the switch must be made by
an Authorized Service Dealer.
DKeep extension cord clear of opera- tor, unit, and obstacles at all times. Do not expose the cord to heat, oil, water, or sharp edges.
DAvoid any body contact with any grounded conductor, such as metal pipes or wire fences, to avoid the
possibility of electric shock.
DGround Fault Circuit Interrupter (GFCI) protection should be provided on the circuit or outlet to be used for this unit. Receptacles are available hav-
ing
DTo reduce the risk of electric shock, this unit has a polarized plug (one blade is wider than the other) and will require the use of a polarized exten- sion cord. This plug will fit into a po- larized extension cord only one way. If the plug does not fit fully into the extension cord, reverse the plug. If it still does not fit, obtain a correct po- larized extension cord.
A polarized extension cord will re- quire the use of a polarized wall out- let. This plug will fit into the polarized wall outlet only one way. If the plug does not fit into the wall outlet, re- verse the plug. If it still does not fit, contact a qualified electrician to install the proper wall outlet. Do not change the equipment plug, exten- sion cord receptacle, or extension cord plug in any way.
UNIT SAFETY
DDo not attempt to repair unit. Inspect entire unit and extension cord before
3
each use. Have damaged parts re- paired or replaced by an Authorized Service Dealer. Make sure all fasten- ers, handles, and guards are in place and securely fastened. A guard or other part that is damaged should be properly repaired or replaced by an Authorized Service Dealer.
DReplace blades that are bent, warped, cracked, broken, or dam-
aged in any other way.
DBefore using your unit, have an Au- thorized Service Dealer repair or re- place parts that are cracked, chipped, broken, or damaged in any
other way.
DUse only genuine replacement blades and accessories as recom- mended for this unit. Never use wire, rope, string, etc. Use of any other accessory or attachment may in-
crease the risk of injury or cause damage to the unit.
DKeep blade guard in place and in good working order.
EDGING SAFETY
DInspect the area to be edged before each use. Remove objects (rocks, broken glass, nails, wire, string, etc.) which can be thrown by blade or can wrap around blade shaft.
DKeep children away. Keep others in- cluding children, animals, bystanders and helpers outside the 100 foot (30 meter) Hazard Zone. Stop the unit immediately if you are approached.
50 ft.
(15 m)
DAlways keep unit in front of your body. Keep hands and feet away from cut-
ting area.
DHold the unit firmly with both hands. D Do not overreach or use from unsta- ble support. Keep firm footing and
balance at all times.
D Keep wheels in contact with ground. D Do not raise the unit above the
ground. The blade can come dan- gerously close to your body.
D Always push unit slowly over ground. Stay alert for uneven sidewalks, holes in terrain, large roots, etc.
D Do not force the unit; it will do the job better and with less likelihood of a risk of injury at the rate for which it