Important Points, Operating Position, On/Off

IMPORTANT POINTS

SUse the minimum throttle speed necessary to effectively cut hedges for optimal hedge

trimmer performance.

SNever attempt to use this hedge trimmer to cut hedges that have any branches with a diameter larger than 5/8∀ (1.5 cm).

OPERATING POSITION

Hearing

Protection Eye

Protection

STOPPING YOUR ENGINE

D To stop the engine, move the ON/OFF switch to the OFF position.

SIf engine does not stop, move choke lever to the FULL CHOKE position.

STARTING YOUR ENGINE

DFuel engine. Move at least 10 feet (3 me- ters) away from the fueling site.

DRemove the blade cover from the blade before starting the unit.

DHold the unit on the ground in the starting position as shown. Support unit so the blade is off of the ground and away from trees, bushes, onlookers, etc.

HELPFUL TIP

If your engine still does not start after following these instructions, please call 1-800-554-6723.

STARTING A COLD ENGINE (or a warm engine after running out of fuel)

WARNING: The cutting blade will be moving once the throttle lock has been set and the engine is started. Wear your protec- tive equipment and observe all safety instruc- tions.

	ON/OFF	Throttle Lock
	Switch	Throttle Lock
	Switch

Throttle Lock-out

Throttle

Trigger

1. Move the ON/OFF switch to the ON posi- tion.

2. Engage the throttle lock as follows: D press the throttle lock--out;

D squeeze and hold throttle trigger; D press and hold throttle lock, then D release the throttle trigger

NOTE: Keep the throttle lock engaged until the engine starts.

3.Slowly press the primer bulb 6 times.

4.Move the choke lever to the FULLCHOKE position.

Primer Bulb	Choke
	Choke
	Lever

5. Pull starter rope handle sharply until en- gine sounds as if it is trying to run, but do not pull rope more than 6 times.

6. Move the choke lever to the HALF CHOKE position.

7. Pull starter rope sharply until the engine runs, but no more than 6 pulls.

NOTE: If the engine doesn’t start after 6 pulls (at the HALF CHOKE position), check to make sure the ON/OFF switch is in the ON position. Move the choke lever to the FULL CHOKE position and press the primer bulb 6 times; pull the starter rope 2 more times. Move the choke lever to the HALF CHOKE position and pull the starter rope until the en- gine runs, but no more than 6 more pulls. If the engine still doesn’t start, it is probably flooded. Proceed to STARTING A FLOODED ENGINE.

8.Once the engine starts, allow the engine to run 10 seconds, then move the choke lever to the OFF CHOKE position. Allow the unit to run for 30 more seconds at the OFF CHOKE position before squeezing and releasing the throttle trigger to release the throttle lock.

NOTE: If engine dies with the choke lever in the OFF CHOKE position, move the choke lever to the HALF CHOKE position and pull the rope until the engine runs, but no more than 6 pulls.

-- 5 --

25 HHT specifications

The Poulan 25 HHT is a versatile and powerful tool designed for landscaping and yard maintenance. Known for its reliability and efficiency, this model has become a favorite among both professionals and homeowners looking to keep their outdoor spaces tidy and well-groomed.

One of the standout features of the Poulan 25 HHT is its robust 25cc, 2-cycle engine. This powerful engine not only provides the necessary torque to handle tough weeds and dense brush but is also designed for easy starting, thanks to Poulan's Easy Start technology. This feature minimizes the effort required to start the engine, allowing users to get to work without the usual frustration associated with pull-start motors.

In terms of cutting capabilities, the Poulan 25 HHT is equipped with a bump feed trimmer head, which allows for quick and easy line advancement. This means that users can keep mowing without interruption, making the chore of yard work much more efficient. The double line feature provides wider cuts, ensuring faster trimming and a cleaner look in less time. Additionally, the trimmer head is designed for easy line replacement, further enhancing user convenience.

The design of the Poulan 25 HHT takes ergonomics into account, featuring a lightweight and balanced structure that reduces user fatigue during extended use. The adjustable handle enables users to customize their grip, enhancing comfort and control while trimming.

Another significant characteristic of this model is its versatility. The Poulan 25 HHT is not just a string trimmer; it can be attached to various accessories that transform it into a multi-tool. This includes capabilities for edging, cultivating, and even brush cutting. Such versatility makes it a cost-effective solution for homeowners who need multiple tools for their landscaping needs.

Safety is also a priority with the Poulan 25 HHT. It features a guard that protects the user while allowing for efficient discharge of cut grass and debris. The overall build quality ensures durability, allowing the unit to withstand tough conditions and extensive use.

In conclusion, the Poulan 25 HHT stands out as an excellent choice for anyone in need of a reliable, powerful, and versatile trimmer. Its combination of a strong 25cc engine, user-friendly features, and adaptability make it a valuable addition to any garden maintenance arsenal, helping users achieve a beautifully manicured landscape with ease.