Poulan 331 Fuel System, Troubleshooting Table Engine, Other, Trouble Cause Remedy

Page 13

If your unit is to be stored for a period of time: S Clean the entire unit before lengthy

storage.

SStore in a clean dry area.

SLightly oil external metal surfaces.

FUEL SYSTEM

Under FUELING ENGINE in the OPERA- TION section of this manual, see message la- beled IMPORTANT regarding the use of ga- sohol in your engine.

Fuel stabilizer is an acceptable alternative in minimizing the formation of fuel gum deposits during storage. Add stabilizer to the gasoline in the fuel tank or fuel storage container. Fol- low the mix instructions found on stabilizer container. Run engine at least 5 minutes after adding stabilizer.

TROUBLESHOOTING TABLE

ENGINE

SRemove spark plug and pour 1 teaspoon of 40:1, 2-cycle engine oil (air cooled) through

the spark plug opening. Slowly pull the starter rope 8 to 10 times to distribute oil.

SReplace spark plug with new one of recom-

mended type and heat range.

SClean air filter.

S Check entire unit for loose screws, nuts, and bolts. Replace any damaged, broken, or worn parts.

S At the beginning of the next season, use only fresh fuel having the proper gasoline to oil ratio.

OTHER

SDo not store gasoline from one season to

another.

S Replace your gasoline can if it starts to rust.

WARNING: Always stop unit and disconnect spark plug before performing all of the recommended remedies below except remedies that require operation of the unit.

 

TROUBLE

CAUSE

REMEDY

 

 

 

 

 

 

Engine will not

1. Engine flooded.

1.

See “Starting a Flooded Engine” in

 

start.

 

 

 

Operation Section.

 

 

2. Fuel tank empty.

2.

Fill tank with correct fuel mixture.

 

 

3. Spark plug not firing.

3.

Install new spark plug.

 

 

4. Fuel not reaching

4.

Check for dirty fuel filter; replace.

 

 

 

carburetor.

 

Check for kinked or split fuel line;

 

 

 

 

 

repair or replace.

 

 

5. Carburetor requires

5.

See “Carburetor Adjustment” in

 

 

 

adjustment.

 

Service and Adjustments Section.

 

 

 

 

 

 

 

Engine will

1.

Carburetor requires

1.

See “Carburetor Adjustment” in

 

not idle

 

adjustment.

 

Service and Adjustments Section.

 

properly.

2.

Crankshaft seals worn.

2.

Contact an authorized service dealer.

 

 

3.

Compression low.

3.

Contact an authorized service dealer.

 

Engine will not

1.

Air filter dirty.

1.

Clean or replace air filter.

 

accelerate,

2. Spark plug fouled.

2.

Clean or replace plug

 

lacks power,

3.

Carburetor requires

 

and regap.

 

or dies under

3.

See “Carburetor Adjustment” in

 

a load.

 

adjustment.

 

Service and Adjustments Section.

 

 

4.

Carbon build-up on

4.

Contact an authorized service dealer.

 

 

 

muffler outlet screen.

 

 

 

 

5.

Compression low.

5.

Contact an authorized service dealer.

 

Engine

1.

Choke partially on.

1.

Adjust choke.

 

smokes

2.

Fuel mixture incorrect.

2.

Empty fuel tank and refill with

 

excessively.

3.

Air filter dirty.

 

correct fuel mixture.

 

 

3.

Clean or replace air filter.

 

 

4.

Carburetor requires

4.

See “Carburetor Adjustment” in

 

 

 

adjustment.

 

Service and Adjustments Section.

 

Engine runs

1. Fuel mixture incorrect.

1.

See “Fueling Engine” in Operation

 

hot.

 

 

 

section.

 

 

2. Spark plug incorrect.

2.

Replace with correct spark plug.

 

 

3. Carburetor requires

3.

See “Carburetor Adjustment” in

 

 

 

adjustment.

 

Service and Adjustments Section.

 

 

4. Carbon build-up on

4.

Contact an authorized service dealer.

 

 

 

muffler outlet screen.

 

 

13

Image 13
Contents Manual de Instrucciones Manuel d’Instructions Hazard Zone Operator SafetyEye ProtectionFuel Safety UNIT/MAINTENANCE SafetyCutting Safety Transporting and StorageAdjust and Secure the HAN- Dlebar Carton ContentsAssembly of Shoulder Strap Tools RequiredAssembly Information Trimmer Head Configuring Your UnitAssembly Information Weed Blade Attaching the Plastic Shield and Trimmer HeadAttaching the Metal Shield Installation of the Metal BladeHOW to Stop Your Unit ON/STOP SwitchKnow Your Brushcutter Primer BulbON/STOP Switch Throttle Trigger HOW to Start Your UnitStarting a Warm Engine Starting a Flooded EngineOperating Instructions for USE with Trimmer Head Operating Position Trimmer Line AdvanceCutting Methods Unit if blade thrust occurs Operating Instructions for USE with Weed BladeOperator or others Clean AIR Filter Inspect and Clean Unit and DE- CalsCheck for Loose Fasteners and Parts Check for Damaged or Worn PartsCarburetor Adjustment Blade ReplacementReplacing the Line Seasonal StorageFuel System Troubleshooting Table EngineOther Trouble Cause RemedyAgency and POULAN/WEED EATER, Divi Electrolux Home PRODUCTS, INC
Related manuals
Manual 11 pages 25.66 Kb

331 specifications

The Poulan 331 is a versatile chainsaw that has become a popular choice among both casual users and professional arborists due to its reliable performance and user-friendly features. This model strikes a balance between power and convenience, making it suitable for a variety of cutting tasks, from tree trimming to firewood chopping.

One of the main features of the Poulan 331 is its lightweight design, which enhances maneuverability. Weighing in at just around 10-12 pounds, it allows users to handle the saw with ease, reducing fatigue during long periods of operation. This makes it an excellent choice for individuals who may not have extensive experience in using chainsaws or those who need a tool for extended use.

Powering the Poulan 331 is a robust 33cc 2-cycle engine, providing ample power for its size. This engine is designed to deliver a high cutting speed, making it efficient for various tasks such as pruning and cutting down small to medium-sized trees. The engine features an easy-start system that reduces the effort needed to start the chainsaw, making it an ideal choice for users who may struggle with traditional starting methods.

The Poulan 331 also incorporates advanced technological features that enhance its performance and safety. A high-performance air filtration system helps keep the engine free from debris, prolonging its life and ensuring consistent power output. Additionally, the automatic oiler keeps the chain lubricated during operation, which not only enhances cutting performance but also reduces wear and tear on the chain.

Safety is a significant concern when operating chainsaws, and the Poulan 331 addresses this with features such as a chain brake and a protective front handguard. The chain brake can stop the chain quickly in the event of kickback, providing an added layer of safety for the user.

Furthermore, the chainsaw's ergonomic handle is designed to provide a comfortable grip, reducing vibrations and enhancing control during use. This feature, combined with the lightweight design, makes the Poulan 331 an accessible tool for a wide range of users.

In summary, the Poulan 331 is a powerful and lightweight chainsaw that combines user-friendly features with advanced technology. Its reliable performance, efficient engine, and safety features make it a preferred choice for both novices and seasoned professionals. Whether for home use or professional applications, the Poulan 331 stands out as a dependable tool in the world of cutting equipment.