Poulan 331 UNIT/MAINTENANCE Safety, Fuel Safety, Cutting Safety, Transporting and Storage

Page 3

SWear hearing protection.

S Never start or run the engine inside a closed room or building. Breathing exhaust fumes can kill.

SKeep handles free of oil and fuel.

S Always use the handlebar and a properly adjusted shoulder strap with a blade (see ASSEMBLY).

UNIT/MAINTENANCE SAFETY

WARNING: Stop unit and disconnect the spark plug before performing mainte- nance (except carburetor adjustments).

S Look for and replace damaged or loose parts before each use. Look for and repair fuel leaks before use. Keep unit in good working condition.

SThrow away blades that are bent, warped, cracked, broken, or damaged in any other way. Replace trimmer head parts that are cracked, chipped, broken, or damaged in any other way before using the unit.

S Maintain unit according to recommended procedures. Keep blade sharp. Keep cut- ting line at the proper length.

SUse only 0.095! (2.4 mm) diameter Poulan PRObrand replacement line. Never use

wire, rope, string, etc.

S Install required shield properly before using the unit. Use the metal shield for all metal blade use. Use the plastic shield for all line trimmer use.

SUse only specified blade or trimmer head; make sure it is properly installed and se- curely fastened.

S Never start engine with clutch shroud re- moved. The clutch can fly off and cause se- rious injury.

SBe sure blade or trimmer head stops turning when engine idles.

SMake carburetor adjustments with the low- er end supported to prevent blade or trim- mer line from contacting any object. Hold unit by hand; do not use the shoulder strap

for support.

SKeep others away when making carburetor

adjustments.

SUse only recommended Poulan PROr ac-

cessories and replacement parts.

S Have all maintenance and service not ex- plained in this manual performed by your au- thorized service dealer.

FUEL SAFETY

SMix and pour fuel outdoors.

SKeep away from sparks or flames. S Use a container approved for fuel.

S Do not smoke or allow smoking near fuel or the unit or while using the unit.

S Avoid spilling fuel or oil. Wipe up all fuel spills before starting engine.

S Move at least 10 feet (3 meters) away from fueling site before starting engine.

S Stop engine and allow it to cool before re- moving fuel cap.

S Empty the fuel tank before storing or trans- porting the unit. Use up fuel left in the car- buretor by starting the engine and letting it run until it stops.

SStore unit and fuel in area where fuel vapors cannot reach sparks or open flames from water heaters, electric motors or switches,

furnaces, etc.

S Always store gasoline in a container ap- proved for flammable liquids.

CUTTING SAFETY

WARNING: Inspect the area to be cut before each use. Remove objects (rocks, broken glass, nails, wire, string, etc.) which can be thrown or become entangled in the blade or trimmer head.

S Keep others including children, animals, bystanders, and helpers at least 50 feet (15 meters) away. Stop engine immediately if you are approached.

SAlways keep engine on the right--hand side

of your body.

SHold the unit firmly with both hands.

SKeep firm footing and balance. Do not over- reach.

S Keep blade or trimmer head below waist level. Do not raise engine above your waist.

S Keep all parts of your body away from blade, trimmer head, and muffler when en- gine is running. A hot muffler can cause se- rious burns.

SCut from your left to your right. Cutting on right side of the shield will throw debris

away from the operator.

SUse only in daylight or good artificial light. S Use only for jobs explained in this manual.

TRANSPORTING AND STORAGE

SStop the unit before carrying.

SKeep muffler away from your body.

SAllow the engine to cool and secure the unit before storing or transporting it in a vehicle.

SEmpty the fuel tank before storing or trans- porting the unit. Use up fuel left in the carbu- retor by starting the engine and letting it run

until it stops.

SStore unit so the blade or line limiter blade

cannot accidentally cause injury. The unit can be hung by the tube.

SStore unit out of reach of children. SAFETY NOTICE: Exposure to vibrations through prolonged use of gasoline powered hand tools could cause blood vessel or nerve damage in the fingers, hands, and joints of people prone to circulation disorders or ab- normal swellings. Prolonged use in cold weather has been linked to blood vessel dam- age in otherwise healthy people. If symptoms occur such as numbness, pain, loss of strength, change in skin color or texture, or loss of feeling in the fingers, hands, or joints, discontinue the use of this tool and seek med- ical attention. An anti--vibration system does not guarantee the avoidance of these prob- lems. Users who operate power tools on a continual and regular basis must monitor closely their physical condition and the condi- tion of this tool.

SPECIAL NOTICE: This unit is equipped with a temperature limiting muffler and spark arresting screen which meets the require- ments of California Codes 4442 and 4443. All U.S. forest land and the states of California,

3

Image 3
Contents Manual de Instrucciones Manuel d’Instructions Protection Operator SafetyHazard Zone EyeTransporting and Storage UNIT/MAINTENANCE SafetyFuel Safety Cutting SafetyTools Required Carton ContentsAdjust and Secure the HAN- Dlebar Assembly of Shoulder StrapAttaching the Plastic Shield and Trimmer Head Configuring Your UnitAssembly Information Trimmer Head Assembly Information Weed BladeAttaching the Metal Shield Installation of the Metal BladePrimer Bulb ON/STOP SwitchHOW to Stop Your Unit Know Your BrushcutterStarting a Flooded Engine HOW to Start Your UnitON/STOP Switch Throttle Trigger Starting a Warm EngineOperating Position Trimmer Line Advance Operating Instructions for USE with Trimmer HeadCutting Methods Operating Instructions for USE with Weed Blade Unit if blade thrust occursOperator or others Check for Damaged or Worn Parts Inspect and Clean Unit and DE- CalsClean AIR Filter Check for Loose Fasteners and PartsSeasonal Storage Blade ReplacementCarburetor Adjustment Replacing the LineTrouble Cause Remedy Troubleshooting Table EngineFuel System OtherAgency and POULAN/WEED EATER, Divi Electrolux Home PRODUCTS, INC
Related manuals
Manual 11 pages 25.66 Kb

331 specifications

The Poulan 331 is a versatile chainsaw that has become a popular choice among both casual users and professional arborists due to its reliable performance and user-friendly features. This model strikes a balance between power and convenience, making it suitable for a variety of cutting tasks, from tree trimming to firewood chopping.

One of the main features of the Poulan 331 is its lightweight design, which enhances maneuverability. Weighing in at just around 10-12 pounds, it allows users to handle the saw with ease, reducing fatigue during long periods of operation. This makes it an excellent choice for individuals who may not have extensive experience in using chainsaws or those who need a tool for extended use.

Powering the Poulan 331 is a robust 33cc 2-cycle engine, providing ample power for its size. This engine is designed to deliver a high cutting speed, making it efficient for various tasks such as pruning and cutting down small to medium-sized trees. The engine features an easy-start system that reduces the effort needed to start the chainsaw, making it an ideal choice for users who may struggle with traditional starting methods.

The Poulan 331 also incorporates advanced technological features that enhance its performance and safety. A high-performance air filtration system helps keep the engine free from debris, prolonging its life and ensuring consistent power output. Additionally, the automatic oiler keeps the chain lubricated during operation, which not only enhances cutting performance but also reduces wear and tear on the chain.

Safety is a significant concern when operating chainsaws, and the Poulan 331 addresses this with features such as a chain brake and a protective front handguard. The chain brake can stop the chain quickly in the event of kickback, providing an added layer of safety for the user.

Furthermore, the chainsaw's ergonomic handle is designed to provide a comfortable grip, reducing vibrations and enhancing control during use. This feature, combined with the lightweight design, makes the Poulan 331 an accessible tool for a wide range of users.

In summary, the Poulan 331 is a powerful and lightweight chainsaw that combines user-friendly features with advanced technology. Its reliable performance, efficient engine, and safety features make it a preferred choice for both novices and seasoned professionals. Whether for home use or professional applications, the Poulan 331 stands out as a dependable tool in the world of cutting equipment.