Throttle control
Starter handle
TRIMMING TIPS
•Set the throttle control in the fast posi- tion. If the weeds or grass are tall and thick, operate the trimmer at a slower walking speed.
•Frequently clean the underside of the trimmer to remove any grass build up. Keep top of engine around starter clear and clean of grass clippings and chaff. This will help engine air fl ow and extend engine life. See “TO REMOVE ENGINE COVER” in the Maintenance section of this manual.
•For best results and longer lasting line, use the ends of the line to do the cutting. This is easily done by moving slowly through very thick and heavy weeds.
•Use the left side of trimmer when trim- ming along fences, walls, fl owerbeds and other such objects.
•If trimmer lines become too short, it will take longer to complete the job. If trim- mer lines are worn to less than half their original length, they should be replaced. See “TO REPLACE TRIMMER LINE” in the Maintenance section of this manual.
•Trimmer head contact with concrete, as- phalt or other hard surfaces may cause premature wear of the ball on bottom of trimmer head.
9