Jonsered HT 2121 Ligations The U. S. Environmental, Consequential Damages Jonsered

Page 8

YOUR WARRANTY RIGHTS AND OB-

LIGATIONS: The U. S. Environmental

Protection Agency, Environment Canada and Jonsered are pleased to explain the emis- sions control system warranty on your year 2001--2004 small off--road engine. Jonsered must warrant the emission control system on your small off--road engine for the periods of time listed below provided there has been no abuse, neglect, or improper maintenance of your small off--road engine. Your emission control system includes parts such as the carburetor and the ignition system. Where a warrantable condition exists, Jonsered will repair your small off--road engine at no cost to you. Expenses covered under warranty in- clude diagnosis, parts and labor. MANUFAC- TURER’S WARRANTY COVERAGE: If any emissions related part on your engine (as listed under Emissions Control Warranty Parts List) is defective or a defect in the mate- rials or workmanship of the engine causes the failure of such an emission related part, the part will be repaired or replaced by Jonsered.

OWNER’S WARRANTY RESPONSIBILI- TIES: As the small off--road engine owner, you are responsible for the performance of the required maintenance listed in your in- struction manual. Jonsered recommends that you retain all receipts covering maintenance on your small off--road engine, but Jonsered cannot deny warranty solely for the lack of re- ceipts or for your failure to ensure the perfor- mance of all scheduled maintenance. As the small off--road engine owner, you should be aware that Jonsered may deny you warranty coverage if your small off--road engine or a part of it has failed due to abuse, neglect, im- proper maintenance, unapproved modifica- tions, or the use of parts not made or ap- proved by the original equipment manufactur- er. You are responsible for presenting your small off--road engine to a Jonsered autho- rized repair center as soon as a problem ex- ists. Warranty repairs should be completed in a reasonable amount of time, not to exceed 30 days. If you have any questions regarding your warranty rights and responsibilities, you should contact your nearest authorized ser- vice center or call Jonsered at 1--916--383--351 1. WARRANTY COM- MENCEMENT DATE: The warranty period begins on the date the small off--road engine is purchased. LENGTH OF COVERAGE:

This warranty shall be for a period of two years from the initial date of purchase. WHAT

IS COVERED: REPAIR OR REPLACE-

MENT OF PARTS. Repair or replacement of any warranted part will be performed at no charge to the owner at an approved Jonsered servicing center. If you have any questions regarding your warranty rights and responsi- bilities, you should contact your nearest au- thorized service center or call Jonsered at

1--916--383--351 1. WARRANTY PERIOD: Any warranted part which is not scheduled for replacement as required maintenance, or which is scheduled only for regular inspection to the effect of ”repair or replace as neces- sary” shall be warranted for 2 years. Any war- ranted part which is scheduled for replace- ment as required maintenance shall be war- ranted for the period of time up to the first scheduled replacement point for that part. DIAGNOSIS: The owner shall not be charged for diagnostic labor which leads to the determination that a warranted part is de- fective if the diagnostic work is performed at an approved Jonsered servicing center.

CONSEQUENTIAL DAMAGES: Jonsered

may be liable for damages to other engine components caused by the failure of a war- ranted part still under warranty. WHAT IS NOT COVERED: All failures caused by abuse, neglect, or improper maintenance are not covered. ADD-ON OR MODIFIED PARTS: The use of add--on or modified parts can be grounds for disallowing a warranty claim. Jonsered is not liable to cover failures of warranted parts caused by the use of add-- on or modified parts. HOW TO FILE A CLAIM: If you have any questions regarding your warranty rights and responsibilities, you should contact your nearest authorized ser- vice center or call Jonsered at 1--916--383--351 1. WHERE TO GET WAR- RANTY SERVICE: Warranty services or re- pairs shall be provided at all Jonsered service centers. Call 1--916--383--351 1. MAINTE-

NANCE, REPLACEMENT AND REPAIR OF EMISSION RELATED PARTS: Any Jonsered approved replacement part used in

the performance of any warranty mainte- nance or repair on emission related parts will be provided without charge to the owner if the part is under warranty. EMISSION CON-

TROL WARRANTY PARTS LIST: Carbure-

tor, Ignition System: Spark Plug (covered up to maintenance schedule), Ignition Module. MAINTENANCE STATEMENT: The owner is responsible for the performance of all re- quired maintenance as defined in the instruc- tion manual.

-- 8 --

Page 7 Page 9
Image 8
Page 7 Page 9
Contents N S E R E D S E R V I C E Know Your Unit Plan AheadHandle Fuel with Caution Operate Your Unit SafelyAssembly ON/OFF Switch Primer Bulb Know Your Hedge TrimmerChoke Throttle TriggerStopping Your Engine Starting Your EngineStarting a Warm Engine On OFFInspect and Clean Unit and Labels Clean AIR FilterCarburetor Adjustment Starting a Flooded EngineReplace Spark Plug Replace Fuel FilterSeasonal Storage Fuel SystemConsequential Damages Jonsered Trol Warranty Parts List CarbureLigations The U. S. Environmental Page Conozca SU Aparato Piense Antes DE ProcederManeje EL Combustible CON Extremo Cuidado Seguridad EN EL Manejo DEL AparatoMantenimiento Apropiado DE SU AparatoAviso DE Seguridad El estar expuesto Aviso Especial Su aparato vieneMontaje Conozca SU Recortadora DE SetosInterruptor ON/OFF Bombeador CebadorPuntos Importantes Posicion DE USOComo Detener EL Motor Como Arrancar EL MotorAdvertencia Asegúrese de Inspeccione EL Silenciador Y LA Rejilla Antichispa Ajuste AL CarburadorMarcha Lenta Cambie LA BujiaAdvertencia Realice los Estacional AlmacenajeSistema DE Combustible OtrosTabla Diagnostica Sintoma Causa SolucionDiagnóstico, las piezas y labor. CU Page Avertissement Tout défaut de Avertissement Avant de faireBON Entretien DE Votre APPA- Reil Lunettes de Bottines sécuritéAvertissement Enlevez le ca Avertissement Le silencieuxAvertissement Avant de com Points Importants Position D’UTILISATIONArrêt DU Moteur Démarrage DU MoteurAvertissement Assurez-vous Avertissement Exécutez les Avertissement Ne laisser perAvertissement Vérifier à nou Autres Recommandations Saisonnière RangementDispositif DU Carburant Moteur IntérieurTableau DE Dépannage Remplir du bon mélange deJonsered. Dommages Indirects Jons Ered peuvent être responsables de dommages

HT 2121 specifications

The Jonsered HT 2121 is a high-performance hedge trimmer that is designed for both professional landscapers and home gardening enthusiasts. Known for its robustness and efficiency, the HT 2121 features a powerful 21cc, 2-cycle engine that delivers efficient cutting performance, allowing users to tackle dense hedges and shrubs with ease.

One of the standout characteristics of the Jonsered HT 2121 is its dual-action cutting blades. The blades are designed to ensure fast and clean cuts, minimizing the effort required by the user. With a blade length of 24 inches, the trimmer provides an impressive reach, making it ideal for handling tall hedges and large areas without the need for frequent repositioning.

The HT 2121 incorporates advanced technology to enhance user experience and reduce fatigue. It features an ergonomic design with a comfortable grip and a well-balanced structure, allowing operators to maneuver it effortlessly during extended use. The lightweight design is particularly beneficial for prolonged trimming sessions, as it reduces strain on the arms and shoulders.

Another important feature of the Jonsered HT 2121 is its easy starting system. The trimmer is equipped with an igniton and fuel system that ensures reliable starting every time. This is especially advantageous for users who may not have experience with two-cycle engines, as it handles starting challenges efficiently.

In terms of durability, the HT 2121 is built to withstand the rigors of outdoor use. The housing is made from high-quality materials that can resist wear and tear, while the cutting blades are designed to last, featuring a precision sharpening process that enhances their longevity.

Additionally, the hedge trimmer is designed with safety in mind. The blade guard and protective features ensure that users can operate the tool safely, reducing the risk of accidents. The HT 2121's low vibration technology also minimizes vibrations during operation, contributing to a more comfortable user experience.

Overall, the Jonsered HT 2121 is a reliable hedge trimmer that combines power, efficiency, and comfort. With its innovative features and user-friendly design, it stands out as a top choice for those looking to achieve a well-manicured garden with minimal effort. Whether it’s for professional landscaping or home gardening, the HT 2121 proves to be an indispensable tool for any gardener.
Top Page Image Contents