ASSEMBLY
UNPACKING
This product requires assembly.
nCarefully remove the tool and any accessories from the box. Make sure that all items listed in the packing list are included.
nInspect the tool carefully to make sure no breakage or damage occurred during shipping.
nDo not discard the packing material until you have care- fully inspected and satisfactorily operated the tool.
nIf any parts are damaged or missing, please call
PACKING LIST
Trimmer Assembly
Front Handle
Curved Shaft Grass Deflector – MightyLite 26CS
Straight Shaft Grass Deflector – MightyLite 26SS
String Head Assembly
Bottle of
Operator’s Manual
WARNING:
If any parts are damaged or missing, do not operate this tool until the parts are replaced. Failure to heed this warning could result in serious personal injury.
WARNING:
Do not attempt to modify this product or create acces- sories not recommended for use with this product. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.
WARNING:
To prevent accidental starting that could cause serious personal injury, always disconnect the engine spark plug wire from the spark plug when assembling parts.
Front handle
See Figure 2.
Loosen and remove the wing nut, lock washer, washer, and bolt from the handle.
Install the handle on the drive shaft housing at the loca- tion indicated by the label on the shaft.
Adjust handle up or down, if necessary, to desired operat- ing position.
Reinstall the bolt, washer, lock washer, and wing nut. Tighten wing nut to secure.
STRING HEAD ASSEMBLY
See Figures 3 - 4.
Place the string head assembly on the end of the drive shaft housing. Make sure the
Install the spool retainer:
Turn the spool retainer clockwise for MightyLite 26CS. Turn the spool retainer counterclockwise for MightyLite 26SS.
Remove the plastic seal from the string head assembly.
FRONT | WASHER | |
HANDLE |
| |
| WING | |
| NUT | |
BOLT | Fig. 2 | |
| ||
SPOOL | SPOOL | |
RETAINER | ||
RETAINER | ||
| ||
| plastic | |
| SEAL | |
DRIVE | STRING | |
SHAFT | ||
| HEAD | |
| assembly | |
| DRIVE | |
| SHAFT | |
| Fig. 3 |
Page