NETGEAR Comprehensive Guide to ProSafe VPN Firewall Configurations and Security Policies

Reference Manual for the ProSafe VPN Firewall FVS114

d.Select IP Subnet in the ID Type menu.

In this example, type 192.168.3.1 in the Subnet field as the network address of the FVS114.

e.Enter 255.255.255.0 in the Mask field as the LAN Subnet Mask of the FVS114.

f.Select All in the Protocol menu to allow all traffic through the VPN tunnel.

g.Select the Connect using Secure Gateway Tunnel check box.

h.Select IP Address in the ID Type menu below the check box.

i.Enter the public WAN IP Address of the FVS114 in the field directly below the ID Type menu. In this example, 22.23.24.25 would be used.

The resulting Connection Settings are shown in Figure 5-10.

3.Configure the Security Policy in the NETGEAR ProSafe VPN Client software.

a.In the Network Security Policy list, expand the new connection by double clicking its name or clicking on the “+” symbol. My Identity and Security Policy subheadings appear below the connection name.

b.Click on the Security Policy subheading to show the Security Policy menu.

Figure 5-11: Security Policy Editor Security Policy

c. Select the Main Mode in the Select Phase 1 Negotiation Mode check box.

4.Configure the VPN Client Identity.

Basic Virtual Private Networking 5-11

202-10098-01, April 2005