NETGEAR fvs114 Transferring a Security Policy to Another Client

Reference Manual for the ProSafe VPN Firewall FVS114
Basic Virtual Private Networking 5-17
202-10098-01, April 2005
2. The Connection Monitor screen for a similar connection is shown below:
Figure 5-19: Connection Monitor screen
In this example you can see the following:
• The FVS114 has a public IP WAN address of 22.23.24.25.
• The FVS114 has a LAN IP address of 192.168.3.1.
• The VPN client PC has a dynamically ass igned address of 192.168.2.2.
While the connection is being established, the Connection Name field in this menu will say “SA”
before the name of the connection. When the connection is successful, the “SA” will change to the
yellow key symbol shown in the illustration above.
Transferring a Security Policy to Another Client
This section explains how to export and import a security policy as an .spd file so that an existing
NETGEAR ProSafe VPN Client configuration can be copied to other PCs running the NETGEAR
ProSafe VPN Client.
Exporting a Security Policy
The following procedure (Figure 5-20) enables you to export a security policy as an .spd file.
Note: While your PC is connected to a remote LAN through a VPN, you might not have
normal Internet access. If this is the case, you will need to close the VPN connection in
order to have normal Internet access.