NETGEAR fvs114 manual Verifying the Status of a VPN Tunnel, Pinging test results

Reference Manual for the ProSafe VPN Firewall FVS114

Figure 5-36: Pinging test results

Note: The pings may fail the first time. If so, then try the pings a second time.

Verifying the Status of a VPN Tunnel

To use the VPN Status page to determine the status of a VPN tunnel, perform the following steps:

1.Log in to the VPN Firewall.

2.Open the FVS114 management interface and click VPN Status under VPN to get the VPN Status/Log screen (Figure 5-37).

Figure 5-37: VPN Status/Log screen

Log—this log shows the details of recent VPN activity, including the building of the VPN tunnel. If there is a problem with the VPN tunnel, refer to the log for information about what might be the cause of the problem.

•Click Refresh to see the most recent entries.

Basic Virtual Private Networking 5-29

202-10098-01, April 2005