NETGEAR fvs114 Set up the FVS114 VPN -Auto Policy illustrated below, Scenario 1 VPN Auto Policy

Reference Manual for the ProSafe VPN Firewall FVS114

4.Set up the FVS114 VPN -Auto Policy illustrated below.

a.From the main menu VPN section, click on the VPN Policies link, and then click on the Add Auto Policy button.

WAN IP address

LAN IP

addresses

Figure 6-10: Scenario 1 VPN - Auto Policy

b.Configure the IKE Policy according to the settings in the illustration above and click Apply to save your settings. For more information on IKE Policy topics, please see “IKE Policies’ Automatic Key and Authentication Management” on page 6-3.

5.After applying these changes, all traffic from the range of LAN IP addresses specified on FVS114 A and FVS114 B will flow over a secure VPN tunnel.

6-20 Advanced Virtual Private Networking

202-10098-01, April 2005