NETGEAR fvs114 manual This screen shows the following parameters, FVS114 Status fields

Reference Manual for the ProSafe VPN Firewall FVS114

This screen shows the following parameters:

Table 7-1.	FVS114 Status fields
Field		Description
System Name		The System Name assigned to the firewall.
Firmware Version		The firewall firmware version.
WAN Port		These parameters apply to the Internet (WAN) port of the firewall.
MAC Address		The MAC address used by the Internet (WAN) port of the firewall.
IP Address		The IP address used by the Internet (WAN) port of the firewall. If no address is
		shown, the firewall cannot connect to the Internet.
IP Subnet Mask		The IP Subnet Mask being used by the Internet (WAN) port of the firewall.
DHCP		The protocol on the WAN port used to obtain the WAN IP address. This field can
		show DHCP Client, Fixed IP, PPPoE, BPA or PPTP. For example, if set to Client,
		the firewall is configured to obtain an IP address dynamically from the ISP.
LAN Port		These parameters apply to the Local (WAN) port of the firewall.
MAC Address		The MAC address used by the LAN port of the firewall.
IP Address		The IP address used by the Local (LAN) port of the firewall. The default is
		192.168.0.1
IP Subnet Mask		The IP Subnet Mask used by the Local (LAN) port of the firewall. The default is
		255.255.255.0
DHCP		Identifies if the firewall’s built-in DHCP server is active for the LAN attached
		devices.

7-2 Maintenance

202-10098-01, April 2005