NETGEAR fvs114 3. Fill in the IP Address or FQDN for the target VPN endpoint WAN connection and click Next., 4. Identify the IP addresses at the target endpoint that can use this tunnel, and click Next.

Reference Manual for the ProSafe VPN Firewall FVS114
5-22 Basic Virtual Private Networking
202-10098-01, April 2005
3. Fill in the IP Address or FQDN for the target VPN endpoint WAN connection and click Next.
Figure 5-25: Remote IP
4. Identify the IP addresses at the target endpoint that can use this tunnel, and click Next.
Figure 5-26: Secure Connection Remote Accessibility
Enter the WAN IP address of the remote VPN
gateway:
(22.23.24.25 in this example)
Enter the LAN IP settings of the remote VPN
gateway:
• IP Address
(192.168.3.1 in this example)
• Subnet Mask
(255.255.255.0 in this example)