NETGEAR fvs114 manual Deleting a VPN Tunnel, Current VPN Tunnels SAs screen

Reference Manual for the ProSafe VPN Firewall FVS114

3.Click VPN Status (Figure 5-40) to get the Current VPN Tunnels (SAs) screen (Figure 5-41). Click Drop for the VPN tunnel you want to deactivate.

Figure 5-41: Current VPN Tunnels (SAs) screen

Note: When NETBIOS is enabled (which it is in the VPNC defaults implemented by the VPN Wizard), automatic traffic will reactivate the tunnel. To prevent reactivation from happening, either disable NETBIOS or disable the policy for the tunnel (see “Using the Policy Table on the VPN Policies Page to Deactivate a VPN Tunnel” on page 5-30).

Deleting a VPN Tunnel

To delete a VPN tunnel:

1.Log in to the VPN Firewall.

2.Click VPN Policies under VPN to display the VPN Policies screen (Figure 5-42). Select the radio button for the VPN tunnel to be deleted and click the Delete button.

Figure 5-42: VPN Policies

5-32 Basic Virtual Private Networking

202-10098-01, April 2005