AMX NXT-1200V manual Modero Table Top Cable CA2250-50, Product Specifications

Touch Panel Accessories

The 3 wires used in a typical XLR lead are often referred to as Ground, Live (Hot) and Return (Cold). "Live" and "Return" carry the "in-phase" and "out-of-phase" versions of the audio respectively. The pins of the XLR plug/socket are as follows:

•X = Ground

•L = Live (Hot)

•R = Return (Cold)

When connecting the MIC OUT connector to a balanced audio input (FIG. 8), use all three audio terminals (+, -, and GND), then connect the "+" terminal to the "live" signal, the "-" terminal to the "return" signal, and the "GND" terminal to the ground signal.

GND

OUT-

OUT+

Ground signal
Return signal	Balanced OUT
Line signal

FIG. 8 Wiring the rear MIC OUT connector for use with Balanced Audio

Modero Table Top Cable (CA2250-50)

The Modero Table Top Touch Panels come with a standard 10' (3.048 m) Modero cable (CA2250-50) that supports Ethernet, Audio/Video, and Power connections. The cable comes terminated with two RJ45 connectors (Ethernet and Audio/Video) and a single 2-pin mini-Phoenix connector for power.

FIG. 9 10 Foot Modero Table Top Cable

Product Specifications

Modero Table Top Cable Specifications

Dimensions (HWD):	• Length: 10 feet (3.048 m)
Connectors:	• Ethernet RJ-45 connector (White) routes Ethernet signals between the touch
	panel and the NXA-AVB/ETHERNET Breakout Box.
	• Audio/Video RJ-45 connector (Black) routes differential audio/video signals
	between the touch panel and the box.
	• 2-pin 3.5 mm mini-Phoenix power connector to route power from the external
	breakout box to the target panel.
Included Accessories:	• Modero Table Top Cable (CA2250-50)

1200V Modero Video Touch Panels 11