AMX NXT-1200V manual Installing an NXT-BP into the NXA-BASE/B, Top view, Front

Touch Panel Accessories

Top view Bottom view

Interface connector (male)

Alignment	Panel Interface
	connector
pegs
	(female)

FIG. 28 NXA-BASE/B shown aligning with NXT panel

Captive fasteners

Installing an NXT-BP into the NXA-BASE/B

The battery base does not directly connect to a power supply, but rather receives its power directly from the Modero panel, through the Panel Interface connector.

Remove any connectors from the rear of the Modero NXT panel before continuing with the installation of the batteries. Power can only be supplied after the batteries have been installed.

1.With the panel mounted on the battery base, open the battery compartment (FIG. 29) by pulling the handle outwards. This compartment houses two NXT-BP batteries.

NXT-BP Battery #2

Battery

Connectors

Interface connector

Battery

Connector

Port

FRONT

Battery #2 slot

NXT-BP Battery #1

Battery

Compartment

FIG. 29 Battery installation procedure

28 1200V Modero Video Touch Panels