AMX NXT-1200V manual Calibrating the Modero Panel, Second press/hold Accesses the Setup

Panel Calibration

Panel Calibration

This section outlines the steps for calibrating the touch panel. It is recommended that you calibrate the panel before its initial use and after completing a firmware download.

Modero panels are factory setup with specific demo touch panel pages. The first splash screen that appears indicates the panel is receiving power, beginning to load firmware, and preparing to display the default touch panel pages. When the panel is ready, the AMX Splash Screen is replaced by the Initial Panel Page (FIG. 46).

AMX Splash Screen	Initial Panel Page
(appears during power-up)	(AMX Logo Page)
FIG. 46 AMX splash screen and initial Panel Page

Calibrating the Modero Panel

1.Press and hold the grey Front Setup Access button (FIG. 47) for 6 seconds (passing-over the Setup page) to access the Calibration setup page (FIG. 48). The panel should first be calibrated properly.

Front Setup

Access button (grey)

-3 second press/hold: Accesses the Setup page

- 6 second press/hold:

Accesses the Calibration page

Single press puts the panel to sleep

FIG. 47 Location of grey Front Setup Access button

1200V Modero Video Touch Panels 49