AMX NXT-1200V Installing CAT5 Suppression Ferrites, Table Top Cable - Specification Elements

Touch Panel Accessories

DESCRIPTION:	9/PAIRS COMPOSITE CABLE CONSISTING OF: ELEMENT #1:
	TWO 4/PAIR 24 AWG STRANDED TINNED COPPER,
	POLYETHYLENE INSULATION, ELEMENT #2: 1/PAIR 18 AWG
	STRANDED TNNED COPPER, PVC INSULATION AND FOIL
	SHIELDED OVERALL PAPER BINDER AND FLEX-PVC JACKET.
ELEMENT #1:	2 X 4/PAIRS:	24 AWG STRANDED COPPER
CONDUCTOR:	24 AWG 7/32 TINNED COPPER; OD .024" NOMINAL
INSULATION:	.0075" WALL POLYETHYLENE; OD .039" NOMINAL
COLOR CODE:	P1: WHITE/BLUE, BLUE
	P2: WHITE/ORANGE, ORANGE
	P3: WHITE/GREEN, GREEN
PAIR:	P4: WHITE/BROWN, BROWN
	2 CONDUCTORS TWINNED LEFT HAND LAY
CABLE:	(TWISTED AT VARIED LAYS TO MINIMIZE CROSS TALK)
	4/P CABLED LEFT HAND LAY (BLUE BINDER, ORANGE BINDER)
BINDER:	PAPER TAPE
ELEMENT #2:	1 PAIR: 18 AWG SHIELDED
CONDUCTOR: 18 AWG 16/30 TINNED COPPER; OD .046" NOMINAL
INSULATION:	.010" WALL PVC; OD .066" NOMINAL
COLOR CODE:	BLACK, RED
DRAIN WIRE:	#22 7/30 TINNED COPPER
SHIELD:	ALUM/POLYESTER TAPE (FOIL SIDE IN)
FINAL ASSEMBLY:	TWO ELEMENT #1 & ELEMENT #2 CABLED ON COMMON
	AXIS TO MINIMIZE DIAMETER
BINDER:	CLOTH TAPE 25% OVERLAP
JACKET:	.045" WALL FLEXIBLE PVC,
COLOR:	BLACK MATT
DIAMETER:	.375 INCHES NOMINAL
MARKING:	NONE

FIG. 12 Table Top Cable - Specification Elements

Each bundle of 4 twisted pairs includes a colored tape indicator for identification.

Installing CAT5 Suppression Ferrites

Before connecting the RJ-45 cables to the panel, install the necessary number of CAT5 Suppression Ferrites (FIG. 13) to their appropriate locations. These ferrites come as part of the Installation Kits mentioned in the previous Specification table (page 2). No tools are required for this installation.

Release the latch to	Insert the CAT5	Push down on the
open the plastic	cable and close	enclosure until it
enclosure.	the enclosure.	snaps closed.

FIG. 13 Installing the CAT5 Suppression Ferrites

All 1200V-Series, VG-Series, and Table Top CV10 panels require the installation of an appropriate number of CAT5 Suppression Ferrites when they use an RJ-45 cable to feed an A/V signal from the breakout box.

1.The CAT5 Suppression Ferrite is housed within a plastic enclosure (shown in FIG. 12) with a latch release on one side. Pull to release the latch and open the enclosure.

14 1200V Modero Video Touch Panels