AMX NXT-1200V Cont, Operating / Storage, Environment, Included Accessories, Other AMX Equipment

Introduction

1200V Panel Specifications (Cont.)

Rear Panel Components	(Side panel location on NXD-Wall Mount panels)
(Cont.):
Stereo Output connector:	• Stereo output through a 3.5mm mini-jack (for use with external
	speakers).
USB connector (2):	• The two Type-A USB ports can connect up to two external keyboard or
	mouse devices for use with Virtual PC applications.
Mini-USB connector:	• 5-pin Mini-USB connector used for programming, firmware update, and
	touch panel file transfer between the PC and the target panel.
	Note: When connecting the panel to PC using a CC-USB (or compatible)
	cable, be sure to power the panel On before attempting to connect the
	USB cable from the PC to the mini-USB port on the panel.
	Refer to Step 5: Confirm and View the current AMX USB device
	connections section on page 58 for more information.
Operating / Storage	• Operating Temperature: 10° C (50° F) to 40° C (104° F)
Environment:	• Operating Humidity: 20% to 85% RH
	• Storage Temperature: -20° C (-4° F) to 60° C (140° F)
	• Storage Humidity: 5% to 85% RH
Included Accessories:	• Installation Kit for 12" and 17" NXD panels (KA2251-01):
	- 2-pin mini-Phoenix connector (41-5025)
	- Four Drywall clips (62-5924-05) and #6 - sheet metal screws
	- One CAT5 Suppression Ferrites (04-0014)
	- Three Phillips-head screws (#4-20 x 0.250 Black)
	• Installation Kit for 12" NXT panels (KA2251-03):
	- 2-pin mini-Phoenix connector (41-5025)
	- Three Phillips-head screws (#4-20 x 0.250 Black)
	- Two CAT5 Suppression Ferrites (04-0014)
	• Modero Table Top Cable (CA2250-50)
	- provided with all NXT Table Top panels.
	• NXA-AVB/ETHERNET Breakout Box (FG2254-10): Provides video/audio
	distribution to the A/V panel over CAT5 cable (up to 200’/60.96m) and
	accepts either Composite or S-Video.
	- Although the 1200V is only sold as part of a KIT configuration,
	the breakout box can be purchased separately.
Other AMX Equipment:	• CB-TP12 (FG031-10)
	- 12" metallic conduit box for Wall Mount installations.
	• CC-USB (Type-A) to Mini-B 5-Wire programming cable (FG10-5965)
	• MB-TP12 Universal VESA Mounting Box for NXD panels (FG031-50):
	- Black metallic VESA back box (62-0031-50)
	- Black plastic cover (with grommet opening) (60-0031-50)
	- Strain relief grommet (45-0004-03)
	- Four Phillips pan-head screws (#8-32 x 0.50 Black) (80-0146-02)
	- Twelve Under-cut Phillips-head screws (#6-32 x 0.500 Black) (80-
	0139)
	• NXA-BASE/B (FG2255)
	- Wireless base for Table Top touch panels (NXT models only).
	• NXA-KLB Kensington Lock Kit for NXT panels (FG2259-10)
	(optional only with NXT models)
	• NXA-PCI80211G Wireless Card (FG2255-04)
	- Although both panel types have the antennas pre-installed, installation
	of the optional mini-PCI card is required to initiate wireless
	communication.

4 1200V Modero Video Touch Panels