AMX NXT-1200V Battery Base Page Elements, Firmware Pages and Descriptions, rating drops below 80%

Firmware Pages and Descriptions

This page is ONLY available on Modero Table Top panels (NXT) using an NXA-BASE/B. The elements of the Battery Base page are described in the table below:

Battery Base Page Elements

Back:	Saves the changes and returns you to the previously active touch panel page.
Connection Status icon:	This visual display of the connection status allows the user to have a current
	visual update of the panel’s connection status regardless of what page is
	currently active.
	• A Lock only appears on the icon if the panel has established a connection
	with a currently secured target Master (requiring a username and password).
Charge Status:	Time Remaining (blue) indicates the amount of charge time (use) remaining
	on the batteries within the connected NXA-BASE/B.
	Time Until Charged (green) indicates the amount of time remaining until the
	batteries installed within the connected NXA-BASE/B are fully charged.
	• Range = 0:00 - 12:59. This is read in HH:MM, hours and minutes.
Panel Shutdown:	The Panel Shutdown UP/DN buttons alter the timeout value (in minutes).
	• This value determines the number of minutes that would need to pass before
	the panel automatically shuts-down.
	• Once shutdown, the unit would have to be restarted. A zero value disables
	this feature. Range = 0 - 240, default = 0 min.
Low Battery Warning:	The Low Battery Warning UP/DN buttons alter the time value (in minutes)
	available on the battery (for use) before the panel displays a low battery
	warning.
	• Range - 10 - 45, default = 15 min.

Very Low Battery Warning: The Very Low Battery Warning UP/DN buttons alter the time value

(in minutes) available on the battery (for use) before the panel displays a very low battery warning. This indicates a near-term panel shutdown.

	Range = 3 - 15, default = 5 min.
	- This value can never exceed the Low Battery Warning value.
	• When the NXT-BP batteries (installed within the NXA-BASE/B battery
	base) reach a point where they need to be recalibrated.
	- A recalibration pop-up screen appears to ask whether or not you choose
	to recalibrate the batteries at this time.
Battery Status fields:	This section provides the ability to monitor the current battery charge levels and
	charge qualities:
	• The Combined Charge Status bargraph indicates the combined power
	charge available from both internal battery connection slots
	(bargraph range = 0 - 100).
	• The Battery One Charge Status bargraph indicates the power charge
	available on the Slot 1 internal battery connection (bargraph range = 0 - 100).
	• The Battery One Quality bargraph indicates the physical capacity (quality) of
	the battery. Quality is the percentage of actual capacity vs. its rated capacity.
	For optimal performance, a battery should be replaced when the quality
	rating drops below 80%.
	• The Battery Two Charge Status bargraph indicates the power charge
	available on the Slot 2 internal battery connection (range = 0 - 100).
	• The Battery Two Quality bargraph indicates the physical capacity (quality) of
	the battery. Quality is the percentage of actual capacity vs. its rated capacity.
	• The Base Version field indicates the firmware version being used by the
	NXA-BASE/B Battery Base connected to the NXT Modero panel.
	• The Battery Level Port field indicates the port being used to report the
	combined charge status level back to the NetLinx Master on (set in TPD4).
	• The Battery Level field indicates the level being used to report the combined
	charge status level back to the NetLinx Master on (set in TPD4).

1200V Modero Video Touch Panels 103