AMX NXT-1200V Button Commands Cont, Programming, CPF-vt addr range, SENDCOMMAND Panel,CPF-500

Programming

"^" Button Commands (Cont.)

^CPF	Syntax:
Clear all page flips	"'^CPF-<vt addr range>'"
from a button.	Variable:
	variable text address range = 1 - 4000.
	Example:
	SEND_COMMAND Panel,"'^CPF-500'"
	Clears all page flips from the button.
^DPF	Syntax:
Delete page flips	"'^DFP-<vt addr range>,<actions>,<page name>'"
from button if it	Variable:
already exists.
	variable text address range = 1 - 4000.
	actions =	Stan[dardPage] - Flip to standard page
		Prev[iousPage] - Flip to previous page
		Show[Popup] - Show Popup page
		Hide[Popup] - Hide Popup page
		Togg[lePopup] - Toggle popup state
		ClearG[roup] - Clear popup page group from all pages
		ClearP[age] - Clear all popup pages from a page with the
		specified page name
		ClearA[ll] - Clear all popup pages from all pages
	page name = 1 - 50 ASCII characters.
	Example:
	SEND COMMAND Panel,"'^DPF-409,Prev'"
	Deletes the assignment of a button from flipping to a previous page.
^ENA	Syntax:
Enable or	"'^ENA-<vt addr range>,<command value>'"
disable buttons	Variable:
with a set
	variable text address range = 1 - 4000.
variable text
	command value = (0= disable, 1= enable)
range.
	Example:
	SEND_COMMAND Panel,"'^ENA-500.504&510.515,0'"
	Disables button pushes on buttons with variable text range 500-504 & 510-515.
^FON	Font ID numbers are generated by the TPDesign4 programmers report.
Set a font to a	Syntax:
specific Font ID	"'^FON-<vt addr range>,<button states range>,<font value>'"
value for those
	Variable:
buttons with a
defined address	variable text address range = 1 - 4000.
range.	button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons
	1 = Off state and 2 = On state).
	font value = range = 1 - XXX. Refer to theDefault Font Styles and ID Numbers table on
	page 129.
	Example:
	SEND_COMMAND Panel,"'^FON-500.504&510.515,1&2,4'"
	Sets the font size to font ID #4 for the On and Off states of buttons with the variable text
	range of 500-504 & 510-515.

The Font ID is generated by TPD4 and is located in TPD4 through the Main menu. Panel > Generate Programmer's Report >Text Only Format >Readme.txt.

1200V Modero Video Touch Panels 145