AMX NXT-1200V manual Close and Resecure the NXD Panel Enclosure, I/O connector

Touch Panel Accessories

Four Pan-head	Outer Housing
Housing	I/O connector
Screws
	plate

NXA-PCI80211G wireless card location

Compact Flash card

FIG. 23 Location of the Compact Flash card and I/O plate on NXD

Step 4: Close and Resecure the NXD Panel Enclosure

1.With the components securely installed, gently place the outer housing back onto the metallic panel casing (with the connector opening on the right-side of the panel) and align the four pan-head Housing Screw holes along the edges of the outer housing.

Use care not to bend or damage any antenna connections while replacing the outer housing.

2.Insert and secure the four pan-head Housing Screws into the pre-drilled holes along the edges of the NXD unit by using a grounded Phillips-head screwdriver.

3.Reinstall the I/O connector plate by aligning all connectors to their respective locations.

4.Secure the I/O connector plate using a grounded Phillips-head screwdriver and then twist the Stereo Output nut back into the Stereo Output jack.

24 1200V Modero Video Touch Panels