AMX NXT-1200V manual Bor, Bos, Bpp

Programming

"^" Button Commands (Cont.)

^BOR	Refer to theTPD4 Border Styles by Name table on page 130 for more
Set a border to a	information.
specific border	Syntax:
style associated	"'^BOR-<vt addr range>,<border style name or border value>'"
with a border
	Variable:
value for those
buttons with a	variable text address range = 1 - 4000.
defined address	border style name = Refer to theTPD4 Border Styles by Name table on page 130.
range.	border value = 0 - 41.
	Examples:
	SEND_COMMAND Panel,"'^BOR-500.504&510.515,10'"
	Sets the border by number (#10) to those buttons with the variable text range of 500-504
	& 510-515.
	SEND_COMMAND Panel,"'^BOR-500.504&510,AMX Elite -M'"
	Sets the border by name (AMX Elite) to those buttons with the variable text range of
	500-504 & 510-515.
	The border style is available through the TPDesign4 border-style drop-down list. Refer to
	theTPD4 Border Styles by Name table on page 130 for more information.
^BOS	The new Slot ID # is set only if the specified slot is not the same as the current slot
Set the video	selected. Passthru sets the passthru mode to On.
	This is an optional parameter and ONLY passes data to the PC.
window slot ID #
to the new Slot	Syntax:
ID #.	"'^BOS-<vt addr range>,<button states range>,<slot
	number>,<passthru>'"
	Variable:
	variable text address range = 1 - 4000.
	button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons
	1 = Off state and 2 = On state).
	slot number = 0 = No Video Fill (Video Off)
	1 = Composite Video (Video Fill) (Video On)
	2 = Component RGB
	3 = Streaming Video. 1200V panels only have Slot 1 available.
	passthru = Passthru disable = 0 or Passthru enable = 2.
	Example:
	SEND_COMMAND Panel,"'^BOS-500,1,1'"
	Sets the button to display Composite video with no pass-thru.
	Refer to theVideo Adjustment Slide-Out Option Bar section on page 101 for more informa-
	tion on the slot assignments within a panel.
^BPP	Zero clears the flag.
Set or clear the	Syntax:
protected page flip	"'^BPP-<vt addr range>,<protected page flip flag value>'"
flag of a
	Variable:
button.
	variable text address range = 1 - 4000.
	protected page flip flag value range = 0 - 4 (0 clears the flag).
	Example:
	SEND_COMMAND Panel,"'^BPP-500,1'"
	Sets the button to protected page flip flag 1 (sets it to password 1).

142 1200V Modero Video Touch Panels