AMX NXT-1200V manual Installing the NXA-AVB/ETHERNET, Nxa-Avb/Ethernet, Breakout Box

Touch Panel Accessories

NXA-AVB/ETHERNET Specifications (Cont.)

Rear Components:	• 6-pin 3.5 mm Phoenix connector for in-bound (left/right channel) audio
	• 4-pin 3.5 mm Phoenix connector for out-bound (from microphone) audio
	• BNC connector (female) for Composite or Chroma (for video-capable
	panels only)
	• BNC connector (female) for luminance (for video-capable panels only)
	• RJ-45 connector for Ethernet input from the control system
	• 2-pin 3.5 mm Phoenix connector for in-bound power
Included Accessories:	• Two 2-pin Phoenix connectors (41-5025)
	• 4-pin Phoenix connector (41-5047)
	• 6-pin Phoenix connector (41-5063)
	• Rack Mount Kit (KA2250-40) with mounting bracket (62-2254-02)
Other AMX Equipment:	• AC-RK Accessory RackMount Kit (FG515)
	• Modero Table Top Cable (CA2250-50)

Installing the NXA-AVB/ETHERNET

A 12 VDC-compliant power supply can indirectly provide power to a Modero panel by routing power through the NXA-AVB/ETHERNET Breakout Box. FIG. 4 shows a sample wiring configuration using both an indirect or direct power connection for a video-capable Modero panel.

	Indirect	Ethernet In				Mic Out		Line Level out
	Connect							(to amplifier
			(RJ-45)		(4-pin captive-wire)
	12 VDC power			Video In			Audio In	or VOL card)
	supply			(BNC)			(6-pin captive-wire)
									(rear)
			NXA-AVB/ETHERNET
	Power			Breakout Box
									(front)
	supplied via
	NXA-AVB box
				Ethernet		Audio/Video
12 VDC power
				(CAT5)		(CAT5)
	supply

or

Direct

Connect

NXD/T Video-capable

Touch Panels

FIG. 4 Sample wiring configuration on video-capable panels using this breakout box

A 12 VDC-compliant power supply can also directly provide power through the unit to a target Modero panel. FIG. 5 shows a sample wiring configuration for a non-video capable Modero panel.

Direct connect

12 VDC power

supply

Ethernet

(CAT5)	Audio (CAT5)
	between the
	NXA-AVB/ETHERNET
	Breakout Box

NXD/T Non-video capable

Touch Panels

FIG. 5 Sample wiring configuration using CA Modero panels

8 1200V Modero Video Touch Panels