AMX NXT-1200V manual Wiring information for the Modero Table Top cable

Touch Panel Accessories

Modero Table Top Cable Specifications (Cont.)

Other AMX Equipment:

Note: All 1200V, VG-Series, and CV10 Table Top panels routing an Audio/Video signal from a breakout box must use the appropriate number of CAT5 Suppression Ferrites which are included as part of installation kits accompanying your particular Modero panel.

Each of the following Installation Kits come with the appropriate number of CAT5 Suppression Ferrites.

These ferrites must be installed onto their appropriate locations.

•Installation Kit for 12" and 17" NXD panels (KA2251-01):

-2-pin mini-Phoenix connector (41-5025)

-Three Phillips-head screws (#4-20 x 0.250 Black) (80-0114-08)

-One CAT5 Suppression Ferrite (04-0014)

-Four Drywall clips (62-5924-05) and #6 -metal strips (80-0192)

•Installation Kit for 15" NXD panels (KA2251-02):

-2-pin mini-Phoenix connector (41-5025)

-Three Phillips-head screws (#4-20 x 0.250 Black) (80-0114-08)

-Two CAT5 Suppression Ferrites (04-0014)

-Four Drywall clips (62-5924-05) and #6 -metal strips (80-0192)

•Installation Kit for 12" NXT panels (KA2251-03):

-2-pin mini-Phoenix connector (41-5025)

-Three Phillips-head screws (#4-20 x 0.250 Black) (80-0114-08)

-Two CAT5 Suppression Ferrites (04-0014)

•Installation Kit for 15" and 17" NXT panels (KA2251-04):

-2-pin mini-Phoenix connector (41-5025)

-Three Phillips-head screws (#4-20 x 0.250 Black) (80-0114-08)

-One CAT5 Suppression Ferrite (04-0014)

•Installation Kit for 10" NXT panels (KA2259-01):

-2-pin 3.5 mm mini-Phoenix connector (41-5025)

-One CAT5 Table Top Suppression Ferrite (04-0014)

-One cylindrical CAT5 USB Mouse Suppression Ferrite (04-0018-SA)

Wiring information for the Modero Table Top cable

If your installation requires custom cable configurations, you can purchase bulk (non-terminated) cable from Liberty Wire and Cable under the nomenclature "AMX Table Top Cable - Modero" (phone#:

(800)530 8998 or +1-719-388-7518). When building a custom Table Top cable, please refer to the table below to calculate the maximum length of the cable for your particular installation/setup.

Maximum Table Top Cable Lengths for Modero Panels

Panel Sizes:	7" Panel	10" Panel	12" Panel		15" Panel		17" Panel
Setup I: Using a panel without a battery base*:
Maximum cable length	150’ (45.72 m)	150’ (45.72 m)	49’	(14.94 m)	39’	(11.89 m)	10’ (3.05 m)
Setup II: Using a panel with a battery base*:
Maximum cable length	56’ (17.07 m)	56’ (17.07 m)	25’	(7.62 m)	15’	(4.57 m)	10’ (3.05 m)

*The total Modero cable run from the 13.5 V power source.

*The total Modero cable run from the 13.5 V power source (12 VDC-compliant power supply).

12 1200V Modero Video Touch Panels