AMX NXT-1200V manual Protected Setup Page, Protected Setup Navigation Button Elements

Firmware Pages and Descriptions

These Navigation Buttons are specific to these Modero panels and include the panel specific elements described in the following table:

Protected Setup Navigation Button Elements

G4 Web Control:	Press the G4 Web Control button to access the G4 Web Control page where
	you can enable or disable display and control of your panel (via the web) by a
	PC running a VNC client.
	• Refer to the Using G4 Web Control to Interact with a G4 Panel section on
	page 74 for more detailed information.
Sensors:	Press the Sensors button to access the Sensors Setup page where you can
	modify/monitor both the light and motion sensor settings.
	• Refer to the Sensor Setup Page section on page 110 for more detailed
	information.
Passwords:	Press the Passwords button to access the Passwords Setup page where you
	can specify up to five security passwords. Default password is 1988.
	• Refer to the Password Setup Page section on page 112 for more detailed
	information.
Calibrate:	Press the Calibrate button to access the Calibration page where you can use
	the displayed set of crosshairs to calibrate a touch panel.
	• Refer to the Calibration Page section on page 113 for more detailed
	information.
Wireless Settings:	Press the Wireless Settings button to access the Wireless Settings page where
	you can setup the wireless connection parameters used by the
	NXA-PCI80211G wireless card located within the Modero panel.
	• Refer to the Wireless Settings Page section on page 114 for more detailed
	information.
System Settings:	Press the System Settings button to access the System Settings page where
	you can alter the communication parameters of both the NetLinx Master and
	Modero panel.
	• Refer to the System Settings Page section on page 118 for more detailed
	information.

Protected Setup Page

The Protected Setup page (FIG. 92) centers around the properties used by the panel to properly communicate with the NetLinx Master. Enter the factory default password (1988) into the password keypad to access this page.

Provides access to the panel firmware pages by enabling the grey front setup access button:

- Setup page (after a 3 second press/hold)

- Calibration page (after a 6 second press/hold)

FIG. 92 Protected Setup page-showing default values

1200V Modero Video Touch Panels 105