AMX NXT-1200V Antennas connectors, Connection point between the braces and the mini-PCI card

Touch Panel Accessories

FIG. 18 Location of the mini-PCI card connector on main board

3.Carefully remove the gold-tipped terminal ends of the antenna from their factory default connectors on the main board. The antenna is secured at this location to restrict its movement prior to connection to a wireless card.

4.Firmly grasp the NXA-PCI80211G mini-PCI card (from the edges) and insert the pins (at a 25° angle) into the opening on the connector (FIG. 19).

5.While maintaining the 25° angle alignment on the new module, push it in firmly until the contact pins are completely inside the connector and the card "snaps" into place (FIG. 19).

6.Push the card downward (to the main board) until the side braces snap atop the NXA-PCI80211G and hold it in place.

Antennas connectors

Connection point between the braces and the mini-PCI card

FIG. 19 Installation of the mini-PCI card connector on main board

7.Locate the terminal ends of the antennas and apply downward pressure to "snap" them onto their gold-tipped counterparts on the mini-PCI card (FIG. 19). Carefully push down on each connector to verify it is securely joined to the card.

It is recommended that any upgrade of internal equipment be done simultaneously in order to reduce the risk of damage to internal components.

20 1200V Modero Video Touch Panels