AMX NXT-1200V manual 1200V-Series Modero Connectors, Cleaning the Touch Overlay

Introduction

1200V Panel Specifications (Cont.)

Other AMX Equipment (Cont.):

•NXA-RK12 (FG2904-50)

-RackMount kit for 12" Wall Mount touch panels (NXD models only).

•NXT-BP (FG2250-10)

-Battery pack for Table Top panels. Provides 4 hours of continual operation (NXT models only)

•NXT-CHG (FG2250-50)

-Battery charger for NXT-BP batteries. Charges batteries in 8 hours.

•Upgrade Compact Flash (factory programmed with firmware):

NXA-CFTPV256M- 256 MB V/VG compact flash card (FG2116-43) NXA-CFTPV512M- 512 MB V/VG compact flash card (FG2116-44) NXA-CFTPV1G- 1 GB V/VG compact flash card (FG2116-45)

1200V-Series Modero Connectors

FIG. 2 shows the connectors on the 1200V Modero Video panels. The Audio/Video RJ-45 connector provides differential audio/video signals between the touch panel and the NXA-AVB/ETHERNET. This connector routes Composite video, Stereo (left/right) audio, and microphone audio.

NXT-1200V - connectors located	NXD-1200V - connectors located
on rear panel of the base
	on left side panel

AL

12VDC

AUDIO/VIDEO ETHERNET PWR

PROGRAM

			Stereo	Keyboard/Mouse
Audio-Video from		Power			Mini-USB
			Output	USB connectors (2)
NXA-AVB/ETHERNET	Ethernet				(Program Port)
	(CAT5)
(CAT5)

FIG. 2 Connector layout on sample 1200V Video Touch Panels

Cleaning the Touch Overlay

You should clean the touch screen overlay after each day’s use. Always use clean cotton cloths and a spray bottle containing water.

1200V Modero Video Touch Panels 5