JVC GR DV 3 specifications To S-VIDEO OUT connector

3

EN55

Connection to a TV or VCR equipped with an S-VIDEO IN and/or A/V input (RCA type) connectors

Yellow: VIDEO

White: AUDIO L

Red: AUDIO R

TV

To AUDIO OUT connectors (L/R)

To AUDIO IN connectors (L/R)

Red

White

Yellow

To VIDEO OUT connector

To S-VIDEO OUT connector

VIDEO/AUDIO cable (provided)

Core filter

(connect when the S-VIDEO)

cable is not used

	S-VIDEO cable
Core filter
	(provided)

White	To
	TV or VCR
Red
Yellow
To VIDEO IN	VCR
connector
To S-VIDEO IN
connector

1 CONNECT AC CHARGER STATION TO TV OR VCR

Connect as shown in the illustration 1, 2 or 3 (☞ pg. 54, 55).

If Using A VCR . . . go to step 2.

If not . . . go to step 3.

2 CONNECTINPUT VCR OUTPUT TO TV

Refer to your VCR’s instruction manual.

3 TURN ON POWER

4 SELECT TV’S VIDEO MODE

Set the TV to the channel or mode appropriate for video playback.

To choose whether or not the following displays appear on the connected TV . . .

• Date/Time, Time Code

.... set to “ON” or “OFF” in the Playback Menu

(☞ pg. 50).

• Playback Sound Mode Display

.... set the Power Dial to “ M ”, press the MENU

button, and set “ON SCREEN” in the Date/ Time Menu (☞ pg. 11) to “ON” or “OFF”. Then set the Power Dial back to “PLAY”.

NOTES:

●Never connect any VIDEO/AUDIO cable or S- VIDEO cable other than those provided to the AC Charger Station’s connectors.

●When using the provided VIDEO/AUDIO cable, S-VIDEO cable or editing cable, make sure you connect the end of the cable with the core filter to the camcorder. The core filter improves perform- ance of equipment.

●Make sure you adjust the TV sound volume to its minimum level to avoid a sudden burst of sound when the camcorder is turned on.

●To keep the camcorder's display from appearing on the TV screen during playback, press the IND.ON/OFF button for longer than 1 second.

●Set the VIDEO OUT select switch of the cable adapter as required:

Y/C: When connecting to a TV or VCR which accepts Y/C signals and uses an S-VIDEO cable. CVBS: When connecting to a TV or VCR which does not accept Y/C signals and uses an audio/ video cable.