Touch Panel Accessories

Step 3: Install the Compact Flash Memory Card upgrade

1.Discharge any static electricity from your body by touching a grounded metal object and then locate the existing Compact Flash card (factory-shipped with 128 MB) on the main board (FIG. 20 for Table Top panels and FIG. 23 for Wall Mount panels).

Outer Housing

NXA-PCI80211G wireless card

I/O connector plate

Eight Housing

 

Screws

Compact Flash card

 

FIG. 20 Location of the Compact Flash card and I/O plate on NXT

2.Insert the tip of a grounded flat-head screwdriver into one of the card removal grooves (located on either side of the existing card), and gently pry the card out of the slot (FIG. 21). Repeat this process on the opposite card removal groove. This alternating action causes the card to "wiggle" away from the on-board connector pins.

Card removal grooves

On-board Compact

Flash connector (with pins)

Insert with arrow facing towards the pins

Connector opening

FIG. 21 Removing/installing a Compact Flash Memory card

3.Grip the old card by its sides and then carefully pull it out of the slot.

4.Remove the new CF memory card from it’s anti-static bag.

1200V Modero Video Touch Panels

21

 

 

Page 31
Image 31
AMX NXT-1200V manual Install the Compact Flash Memory Card upgrade, Location of the Compact Flash card and I/O plate on NXT