AMX NXT-1200V manual Battery Base

Firmware Pages and Descriptions

Video Adjustment Page Elements (Cont.)

Settings:	• The Default Settings button sets the video settings to their default values
	(indicated in this table).
	• The Undo Changes button disregards any changes made on the page since
	the last settings were saved.
	• The Save Settings button saves any changes made to this page.
Video Settings:	• The Black & White button toggles the Black & White display mode.
	Default = Off.
	• The Sharpness button toggles the Interpolate (Sharpness) feature.
	Default = On.
	• The Interlace button toggles the Interlacing feature.
	Default = On.
Status:	Displays whether or not a video-sync signal is detected.
Format:	Allows you to press this blue field and cycle through a choice of available video
	formats (NTSC, PAL, SECAM, or Auto detect).
	• Default = Auto.
Brightness:	Use the UP/DN buttons to alter the brightness level of the incoming signal.
	• Range = 0 - 255, default = 128.
Contrast:	Use the UP/DN buttons to alter the contrast level of the incoming signal.
	• Range = 0 - 255, default = 128.
Saturation:	Use the UP/DN buttons to alter the color saturation level of the incoming signal.
	• Range = 0 - 255, default = 128.
Hue:	Use the UP/DN buttons to alter the hue level of the incoming signal.
	• Range = 0 - 255, default = 128.

Battery Base Page

This page (FIG. 90) allows you to alter/set the power warning preferences, monitor battery status information, and alter the display times for the battery warnings. The fields on this page are populated with information after the panel is connected to an optional NXA-BASE/B Battery Base containing up to two NXT-BP batteries.

FIG. 90 Battery Base page

102 1200V Modero Video Touch Panels