AMX NXT-1200V manual Slt, Vks

	Programming
Input Commands (Cont.)
^SLT	These commands are directed at the video card subsystems. Slot commands contain a
Send a	series of name/value pairs separated by commas. These commands are case insensitive.
	Syntax:
command to a
given slot.	"’^SLT-<slot number>,<slot command>’"
	Variables:
	slot number = 1 - 3 (each of these options corresponds to an on-board slot
	position where the related components reside.)
	Slot 1= Composite Video (common to both 1200-V and VG-Series)
	Slot 2 = RGB Component Video (only available on the VG-Series)
	Slot 3 = Streaming MPEG Video (only available on the VG-Series)
	slot command = see list below:
	Interlace = <0 or 1> where:
	0 = Deselects Interlace and 1 = Selects Interlace
	Sharpness = < 0 or 1> where:
	0 = Disables Sharpness and 1 = Enables Sharpness
	SyncOn Green = < 0 or 1> where
	0 = Disables SyncOnGreen and 1= Enables SyncOnGreen
	Example:
	SEND_COMMAND TP,"’^SLT-1,Interlace=1’"
	Enables Interlace on the incoming Composite video signal.
	SEND_COMMAND TP,"’^SLT-3,Sharpness=1’"
	Enables sharpness on the incoming MPEG video stream (if available).
	SEND_COMMAND TP,"’^SLT-2,SyncOnGreen=1’"
	Enables the SynOnGreen feature for the incoming RGB signal (if available).
^VKS	Key presses and key releases are not distinguished except in the case of CTRL, ALT, and
Send one or more	SHIFT.
virtual keystrokes	Refer to the Embedded Codes table on page 168 that define special characters which
to the G4	can be included with the string but may not be represented by the ASCII character set.
application.	Syntax:
	"'^VKS-<string>'"
	Variable:
	string = Only 1 string per command/only one stroke per command.
	Example:
	SEND COMMAND Panel,"'^VKS-'8"
	Sends out the keystroke 'backspace' to the G4 application.

1200V Modero Video Touch Panels 167