AMX NXT-1200V manual Slot, Video Adjustment Slide-Out Option Bar

Firmware Pages and Descriptions

Video Adjustment Slide-Out Option Bar

Pressing the on-screen Video Adjustment button causes an option bar to slide outwards from the Navigation buttons (FIG. 88). This option bar within a 1200V panel provides you with one choice: Video Adjustment. The other two options (RGB Adjustment and Streaming Adjustment) are only available on a VG-Series panel and are greyed-out (inaccessible). Each of these options corresponds to an on-board slot position where the related components reside (as seen below). As an example: Composite video is available via slot 1 because of the location of associated components. Since these components are shared between the 1200V-Series and VG-Series panels, it is an option common to both. Refer to the following section for detailed information on this option.

Slot 1 Slot 2 Slot 3

FIG. 88 Video Adjustment Slide-Out Options Bar

Video Adjustment - Video Adjustment Page

The Video Adjustment page (FIG. 89) (accessed by pressing the Video Adjustment button on the Setup page and then selecting the appropriate button from the option bar) sets the Video properties of the incoming video signal from an NXA-AVB/RGB Breakout Box.

Incoming Video signal

Once done making your screen adjustments, SAVE SETTINGS.

FIG. 89 Video Adjustment page (showing default values)

The elements of the Video Adjustment page are described in the table below:

Video Adjustment Page Elements

Back:	Saves the changes and returns you to the previously active touch panel page.
Connection Status icon:	This visual display of the connection status allows the user to have a current
	visual update of the panel’s connection status regardless of what page is
	currently active.
	• A Lock only appears on the icon if the panel has established a connection
	with a currently secured target Master (requiring a username and password).

1200V Modero Video Touch Panels 101