AMX NXT-1200V manual Install the 802.11g mini-PCI Wireless Card

Touch Panel Accessories

	Base plate
Unscrew these	Outer housing
eight Housing
Screws to remove
the circuit board	45°	Hinge Brackets (2)
housing
DO NOT
REMOVE
these screws
They secure
the speakers
to the main
board

FIG. 16 Location of the attachment screws underneath an NXT panel base

4.Rotate the panel back over (while gripping the entire unit with outer housing) and rest the base on a flat surface.

5.Gently tilt the LCD backward to a 45° angle.

6.In a single motion, carefully pull the outer housing up and then out (away from the LCD panel) to expose the internal circuit board.

7.Unscrew the Stereo Output nut from the Stereo Output jack.

8.Firmly grab the existing connector plate and slide it up and away from the base.

Step 2: Install the 802.11g mini-PCI Wireless Card

1.Discharge any static electricity from your body by touching a grounded metal object.

2.Locate the mini-PCI card connector on the main board (FIG. 17 and FIG. 18).

Outer Housing

NXA-PCI80211G wireless card location

I/O connector plate

Eight Housing
Screws	Compact Flash card

FIG. 17 Location of the NXA-PCI80211G wireless card on the NXT board

1200V Modero Video Touch Panels 19