AMX NXT-1200V manual Wireless Settings Page Elements

Firmware Pages and Descriptions

Wireless Settings Page

The Wireless Settings page (FIG. 100) sets the communication information for the installed wireless interface card. This information includes its corresponding IP communication parameters, wireless communication settings, and read the device number assigned to the Modero panel. These panels can use the NXA-PCI80211G wireless card for wireless communication. This card also supports Wired Encryption Protocol (WEP) encryption of 64-bit and 128-bit key lengths. Refer to both the Wireless Settings Page - Wireless Access Overview section on page 59 and Configuring a Wireless Connection section on page 60 for more detailed information of setting up the Modero panel for wireless network access.

IP Settings section

Wireless Settings section

Red fields are user-editable

Blue fields cycle through choices

Grey fields are read-only

FIG. 100 Wireless Settings page (showing default values)

The elements of the Wireless Settings page are described in the table below:

Wireless Settings Page Elements

Back:	Saves the changes and returns you to the previously active touch panel page.
Connection Status icon:	This visual display of the connection status allows the user to have a current
	visual update of the panel’s connection status regardless of what page is
	currently active.
	• A Lock only appears on the icon if the panel has established a connection
	with a currently secured target Master (requiring a username and password).
IP Settings:	Sets the IP communication values for the touch panel and contains:
DHCP/STATIC
	Sets the panel to either DHCP or Static communication modes.
	• DHCP (Dynamic Host Configuration Protocol) assigns IP Addresses to client
	stations logging onto a TCP/IP network from a DHCP server.
	• Static IP is a permanent IP Address that is assigned to a node in a TCP/IP
	network.
	Note: If DHCP is selected, the following fields become read-only: IP Address,
	Subnet Mask, Gateway, Primary DNS, Secondary DNS, and Domain.
IP Address
	Sets the secondary IP Address assigned to the panel.
Subnet Mask
	Sets a subnetwork address to the panel.
	• Subnetwork mask is the technique used by the IP protocol to filter messages
	into a particular network segment (subnet).

114 1200V Modero Video Touch Panels