AMX NXT-1200V manual Install the new 802.11g mini-PCI Wireless card NXD

Touch Panel Accessories

4.Remove the I/O connector plate by using a grounded Phillips-head screwdriver to remove the two screws and slide the I/O connector plate away from the back box housing.

DO NOT REMOVE these panel securing screws

DO NOT REMOVE these panel securing screws

Unscrew these four Housing Screws

to remove the back box. These make direct contact with the black outer housing.

FIG. 22 Location of the securing screws on an NXD panel

DO NOT REMOVE THE PANEL SECURING SCREWS. These screws secure the LCD to the metallic casing.

5.Unscrew the four pan-head Housing Screws from the rear of the NXD unit (FIG. 22) and gently remove the outer housing. These four screws secure the back box to the internal panel casing.

Step 2: Install the new 802.11g mini-PCI Wireless card (NXD)

1.Complete the procedures outline within Step 2: Install the 802.11g mini-PCI Wireless Card section on page 19 and then continue with the following step.

Step 3: Install the new Compact Flash Memory card (NXD)

1.Complete the procedures outline within Step 3: Install the Compact Flash Memory Card upgrade section on page 21 and then continue with the following step.

1200V Modero Video Touch Panels 23