AMX NXT-1200V manual If you do not get this field continue to step

Configuring Communication

FIG. 70 Web Control VNC installation and Password entry screens

7.Click Yes from the Security Alert popup window to agree to the installation of the G4 WebControl application on your computer. This application contains the necessary Active X and VNC client applications necessary to properly view and control the panel pages from your computer.

The G4 Web Control application is sent by the panel to the computer that is used for communication. Once the application is installed, this popup will no longer appear. This popup will only appear if you are connecting to the target panel using a different computer.

8.In some cases, you might get a Connection Details dialog (FIG. 71) requesting a VNC Server IP Address. This is the IP Address not the IP of the Master but of the target touch panel. Depending on which method of communication you are using, it can be found in either the:

Wired Ethernet - System Settings > IP Settings section within the IP Address field.

Wireless - Wireless Settings > IP Settings section within the IP Address field.

If you do not get this field continue to step 9.

IP Address of touch panel

- obtained from IP Settings section of the System Settings page

FIG. 71 Connection Details dialog

9.If a WebControl password was setup on the G4 WebControl page, a G4 Authentication Session password dialog box appears on the screen within the secondary browser window.

10.Enter the Web Control session password into the Session Password field (FIG. 70). This password was previously entered into the Web Control Password field within the G4 Web Control page on the panel.

1200V Modero Video Touch Panels 77