AMX NXT-1200V manual NXT-CHG Battery Charger Kit FG2255-50K

Touch Panel Accessories

2.Install the NXT-BP battery. label-side down.

3.Align the battery connectors with the corresponding battery connector port (located inside the battery compartment), as shown in FIG. 29.

4.Insert the NXT-BP battery until the connectors securely fit into the battery connector port.

5.Repeat steps 2 through 4 for the other battery.

6.Apply a small amount of pressure to close the battery compartment until the compartment latches.

After a few seconds, the panel will turn On and the AMX logo will appear (indicating the panel is receiving power.

Charging the NXT-BP batteries with the NXA-BASE/B

1.Follow the procedures from the previous sub-section to attach the NXT touch panel to the NXA-BASE/B.

2.Insert each battery into the battery compartment shown in FIG. 29.

3.Insert a 2-pin connector from a power supply to the rear PWR connector on the NXT Modero panel.

The charge status bargraph indicators, on the Battery Base page, indicate when the batteries are fully charged.

The NXA-BASE/B will only charge batteries when the NXT panel is in Sleep mode.

NXT-CHG Battery Charger Kit (FG2255-50K)

The NXT-CHG Kit includes one charger and two batteries. The optional NXT-CHG Modero Power Station (FIG. 30) is a two-slot, stand-alone battery charger that can be used to recharge up to two NXT-BP batteries. The batteries are charged in the order they are inserted into the charger. The NXT-CHG Slot 1 has the feature of being able to completely discharge and recharge (recalibrate) a battery.

Battery Life indicator

NXT-BP Modero Power Pack (battery)

NXT-CHG Modero Power Station (charger)

FIG. 30 NXT-CHG Kit (consists of one NXT-CHG charger and two NXT-BP batteries)

1200V Modero Video Touch Panels 29