Argee MSA-004-004 Step-by-Step Initial Setup Procedures, Login screen, password prompts

Step-by-Step Initial Setup Procedures

For these step-by-step setup procedures, you will need your network administrator to provide you the LAN 1 and LAN 2 IP address and subnet mask, gateway IP address, DNS server IP address(es), host name of the server, and IP address for the Web inter- face (if using a NAT device).

Login screen, password prompts

The login screen displays after powering on the Threat Analysis Reporter unit using a monitor and keyboard, or after creating a HyperTerminal session.

NOTE: If the screensaver currently displays on your screen, press the Enter key to display the login screen.

A.At the login prompt, type in menu.

B.Press the Enter key to display the Password prompt.

C.At the Password prompt, type in the following: #s3tup#r3k

D.Press Enter to display the System Configuration screen:

24 8e6 Threat Analysis Reporter Quick Start Guide