3.Locate the three holes on each side of the chassis and locate the three correspond- ing holes on each of the inner rail.

4.Attach an inner rail to each side of the chassis and secure the inner rail to the chas- sis by inserting three Type G screws through the holes on each side of the chassis and the inner rail. (See the diagram below for a description of the Type G screw.)

5. Repeat the above steps to install the other rail on the chassis.

8e6 Threat Analysis Reporter Quick Start Guide

Page 12
Image 12
Argee MSA-004-004 quick start 8e6 Threat Analysis Reporter Quick Start Guide