Homelite Complete Guide to Spool Replacement and Maintenance
Page 13

MAINTENANCE

WARNING:

Use only original manufacturer's replacement parts, accessories and attachments. Failure to do so may cause poor performance, possible injury and may void your warranty.

You can often make adjustments and repairs described here. For other repairs, have the trimmer serviced by an authorized service dealer.

SPOOL REPLACEMENT

EZ LINE™ TAP ADVANCE SYSTEM

NEW PREWOUND SPOOL

See Figures 14 and 15.

If replacing string only, refer to “String Replacement” later in this manual.

Use only .080 in. (2.0 mm) diameter monofilament string. Use original manufacturer's replacement string for best performance.

1.Stop the engine, disconnect the spark plug wire. Hold the string head and unscrew the spool retainer. Turn counterclockwise.

2.Remove the empty spool from the string head. Keep the spring attached to the spool.

3.To install the new spool, make sure the two strings are captured in the slots opposite each other on the new spool. Make sure the ends of each string is extended approximately 6 in. (152 mm) beyond each slot.

4.Thread the strings into the eyelets in the string head. Carefully push the spool into the string head (gently pull the strings to the outside if necessary). When the spool is positioned in the string head, grasp the strings and pull sharply to release them from the slots in the spool.

5.Push down and turn the spool counterclockwise until it no longer turns. Hold the spool down and rotate clock- wise a small amount. Release the spool. The spool should be locked down in the string head. If not, hold down and rotate until locked.

6.Make sure the string head and the spool retainer are installed on the drive shaft by turning the retainer clockwise to tighten.

7.Pull the strings again to rotate the spool into cutting position. Push the spool retainer down while pulling on string(s) to manually advance the string and to check for proper assembly of the string head.

Page 13

SPOOL

RETAINER

Fig. 14

SPRING

SLOTS

EYELETS

STRING HEAD

SHAFT

Fig. 15

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Operators Manual Important Safety Instructions Table of ContentsIntroduction Specific Safety Rules for Trimmer USE Symbol Name Explanation SymbolsFeatures SpecificationsUnpacking InstructionsEasy Reach models UT20778 Front Handle AssemblySee Figure See Figures 5 Grass Deflector Easy ReachFueling and Refueling the Trimmer OperationOperating the Trimmer Advancing the String Advancing String Using the EZ Line TAP Advance SystemCUT OFF Blade Cutting TipsSee Figures 10 Edger Guide Operation Trim ‘N Edge onlySee Starting and StoppingTo Start a Cold Engine To Start a Warm EngineSpool Replacement EZ Line TAP Advance System MaintenanceNEW Prewound Spool See Figures 14Cleaning the Exhaust Port and Muffler Spark Arrestor String ReplacementSee Figures 16, 17, 18 Fuel CAP Replacing and Cleaning AIR FilterSpark Plug Storing the Trimmer 1 Month or LongerSpeed. See Figure TroubleshootingMixture Needle Limited Warranty Statement WarrantyManufacturers Warranty Coverage Emissions Maintenance Schedule and Warranted Parts List Description Service PartsCalifornia Proposition Service Repair Parts

UT20763 specifications

The Homelite UT20763 is a versatile and efficient electric pole saw that caters to homeowners and landscaping enthusiasts alike. With its focus on practicality and convenience, this tool is designed to make tree trimming and pruning tasks manageable and safe. The UT20763 features a powerful 8 Amp motor that provides ample cutting strength, allowing users to tackle branches up to 7 inches in diameter with ease.

One of the standout characteristics of the Homelite UT20763 is its lightweight design, weighing in at just around 8 pounds. This makes it easy to maneuver, especially when working at height or in awkward positions. The pole extends up to 8 feet, offering a reach of up to 15 feet when combined with the user's height, making it suitable for trimming tall trees without the need for ladders or cumbersome lifts.

The saw is equipped with a 10-inch bar and chain, which not only enhances cutting efficiency but also contributes to cleaner cuts, ensuring that the health of the tree is maintained. The automatic oiling system ensures that the bar and chain are well-lubricated during operation, minimizing wear and extending the life of the tool. Additionally, the translucent oil reservoir allows users to easily monitor oil levels, making maintenance simpler.

Safety is a key design feature of the UT20763. It comes with a protective guard that shields users from debris while in operation. The trigger switch is designed for easy operation and is accompanied by a safety lockout feature to prevent accidental starts, enhancing overall safety during use.

The Homelite UT20763 is part of a growing trend towards electric gardening tools, which are known for their eco-friendliness and reduced noise levels compared to gas-powered models. This pole saw emits zero emissions, making it an environmentally responsible option for those looking to maintain their lawns and gardens.

In summary, the Homelite UT20763 is a reliable electric pole saw ideal for homeowners seeking an efficient and user-friendly tool for tree maintenance. Its combination of a powerful motor, lightweight design, extendable reach, effective cutting capabilities, and emphasis on safety makes it a popular choice for outdoor enthusiasts looking to keep their yards in pristine condition. Whether you have small branches or larger limbs to trim, the UT20763 is built to simplify the task while promoting a greener approach to gardening and landscaping.
Top Page Image Contents