Homelite UT20002, UT20003A, UT20043A, UT20042A, UT20022A, UT20023 Symbols, Symbol Name Explanation

Page 5

SYMBOLS

Some of the following symbols may be used on this tool. Please study them and learn their meaning for safe operation of this product.

SYMBOL

NAME

EXPLANATION

 

Safety Alert Symbol

Precautions that involve your safety.

.

 

 

 

Read the Operator’s Manual

To reduce the risk of injury, user must read and

 

 

understand operator’s manual before using this

 

 

product.

 

Wear Eye and Hearing Protection

Wear eye protection which is marked to comply

 

 

with ANSI Z87.1 as well as hearing protection

 

 

when operating this equipment.

 

Keep Bystanders Away

Keep all bystanders at least 50 ft. (15 m) away.

50' 15m

 

 

 

Ricochet

Thrown objects can ricochet and result in personal

 

 

injury or property damage.

 

No Blade

Do not install or use any type of blade on a

 

 

product displaying this symbol.

 

Blade Thrust

Beware of blade thrust. Products authorized for

 

 

blade use will display this symbol to warn of

 

 

blade thrust.

 

Gasoline and Oil

Use unleaded gasoline intended for motor

 

 

vehicle use with an octane rating of 87 ([R + M] /

 

 

2) or higher. This product is powered by a 2-cycle

 

 

engine and requires pre-mixing gasoline and 2-

 

 

cycle oil.

Page 5

Image 5
Contents UT20042, UT20042A UT20043, UT20043A UT20002, UT20002A UT20003, UT20003AUT20022, UT20022A UT20023, UT20023A Introduction Table of ContentsRead ALL Instructions General Safety RulesSpecific Safety Rules for Trimmer USE Specific Safety RulesSymbol Name Explanation SymbolsSymbol Signal Meaning ServiceWeight without fuel SpecificationsUnpacking InstructionsTrimlite model UT20002, UT20002A, UT20003, UT20003A FeaturesTrim ‘n Edge model UT20022, UT20022A, UT20023, UT20023A See Figure AssemblyFront Handle See Figures 5 Straight Shaft Grass Deflector Easy ReachOperating the Trimmer Fueling and Refueling the TrimmerFuel Mixture Fuel Mixture Premium Exact MIX Gasoline OILAdvancing the String OperationCUT OFF Blade Cutting TipsSee Figures 10 Edger Guide Operation Trim ‘N Edge onlySee Figures 12 Starting and StoppingTo Stop the Engine If Assistance is Required for this ProductSpool Replacement EZ Line TAP Advance System MaintenanceTo install the spool retainer NEW Prewound SpoolSee Figures 16, 17, 18 String ReplacementCleaning the Exhaust Port and MUF- Fler Spark Arrestor Spark Arrestor Cleaning Instructions Replacing and Cleaning AIR FilterFuel CAP Spark PlugTroubleshooting Idle Speed Screw Limited Warranty Statement WarrantyManufacturers Warranty Coverage Emissions Maintenance Schedule and Warranted Parts List California Proposition Service Repair Parts