Homelite UT70127A manual Blade Protector

Page 17

MAINTENANCE

STRING REPLACEMENT

See Figures 20, 21, 22 and 23.

1.Stop the engine and disconnect the sparking plug wire. Hold the string head and unscrew the spool retainer. Turn clockwise.

2.

Remove the spool from the string head. NOTE: Keep

 

 

the spring attached to the spool. Remove any old string

SECOND

 

remaining on the spool.

3.

Cut two pieces of string, each being approximately

STRING

 

2.7 m (9 ft) long.

4.Insert the first string into the anchor hole in the upper part of the spool. Wind the first string round the upper

part of the spool anticlockwise, as shown by the arrows

 

Fig. 22

on the spool. Place string in the slot on upper spool

 

 

flange, leaving about 152 mm (6 in) extended beyond the

 

 

slot. Do not overfill. After winding the string, there should

 

 

be at least 6 mm (1/4 in) between the wound string and

SLOT

ARROWS ON

the outside edge of the spool.

 

SPOOL

5. Repeat above step with second string, using the bottom

 

 

 

part of spool. Do not overfill.

 

 

6. Replace the spool and the spool retainer. Refer to “Spool Replacement “ earlier in this manual.

 

Fig. 23

SPRING

SPOOL

 

ARROWS ON SPOOL

ANCHOR

HOLE

FIRST STRING

Fig. 20

 

BLADE PROTECTOR

See Figures 24.

Always place the blade protector on the blade when the unit is not in use. The blade protector has clips round the edges to snap over the blade and keep it in place. Wear gloves and be cautious when handling the blade.

NOTE: Always remove the blade protector before using the unit. If not removed, the blade protector could become a thrown object as the blade begins to turn.

FIRST STRING

SLOT

BLADE

Fig. 21

BLADE

 

 

PROTECTOR

CLIPS

Fig. 24

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Save this Manual for Future Reference OPERATOR’S ManualSafety Table of ContentsSpecific Safety Rules for Brushcutter and Blade USE Specific Safety Rules for Trimmer USESymbol Name Explanation SymbolsVibration level racing Technical DataUnpacking FeaturesInstructions Packing List for OWNER’S KITAttaching the Power Head to the Trimmer Attachment AssemblyRemoving the Attachment from the Power Head Attaching the Storage HangerFront Handle Clamp Quick Release TAB Bolt Front HandleAttaching the Shoulder Strap Rear Housing Silencer Guard AssemblyGrass Deflector and Blade Guard USE TorqueConverting from Trimmer to Brushcutter Blade GuardGrass Deflector Installing the String Head Installing the BladeConverting from Brushcutter to Trimmer Removing the BladeOperating the Trimmer OperationFuel and Refuelling Grass Deflector Line Trimming CUT- OFF Blade Advancing the StringCutting Tips Cutting Technique Blade Operating the BrushcutterTRI-ARC Blade Starting and Stopping Ignition SwitchTo Start a Cold Engine To Start a Warm EngineSpool Replacement EZ Line TAP Advance System MaintenanceNEW PRE-WOUND Spool See Figures 18Blade Protector Replacing and Cleaning AIR Filter Cleaning the Exhaust Port and SilencerSpark Arrester See Figures 25Sparking Plug Fuel CAPStorage 1 Month or Longer Problem Possible Cause Solution TroubleshootingIdle Speed Screw Needle Safety Directive WarrantyGuarantee Statement Rtsa / Rtuk / RTG Sound Pressure Sound Power Vibration Model Model noPage RyobiTechnologies GmbH

UT70127A specifications

The Homelite UT70127A is a versatile and efficient electric pressure washer designed for homeowners and DIY enthusiasts seeking an effective solution for various cleaning tasks. With its powerful specifications and user-friendly design, the UT70127A provides a reliable option for tackling dirt, grime, and stains on a variety of surfaces.

One of the main features of the UT70127A is its robust electric motor, which delivers an impressive 1700 PSI (pounds per square inch) of cleaning power. This level of pressure is suitable for handling light to medium-duty cleaning jobs, such as washing cars, driveways, patios, and outdoor furniture. The electric motor also ensures quieter operation compared to gas-powered pressure washers, making it more neighbor-friendly while being environmentally conscious.

In terms of technology, the UT70127A incorporates a gradual start feature that helps protect both the motor and the pump. This gentle ramp-up reduces wear and tear and extends the life of the unit. Additionally, the pressure washer is designed with an automatic shut-off system that activates when the trigger is released, conserving energy and preventing overheating. It also includes a 20-foot high-pressure hose that provides ample reach while enabling the user to clean hard-to-reach areas comfortably.

The UT70127A comes with interchangeable nozzles that offer a variety of spray angles. This versatility allows users to switch between different cleaning tasks quickly, from a focused jet for tough stains to a wider spray for more general cleaning. The included detergent tank makes it easy to apply cleaning solutions, enhancing the effectiveness of the washer and making it efficient for a range of surfaces, including concrete and wood.

Another remarkable characteristic of the UT70127A is its lightweight and portable design. Weighing in at a manageable weight, it features built-in wheels for easy maneuverability. The compact format makes storage simple and convenient, ensuring that this pressure washer can fit in smaller spaces without hassle.

In summary, the Homelite UT70127A electric pressure washer combines power, efficiency, and innovative technology, making it an ideal tool for everyday cleaning needs. Its user-friendly features, portability, and diverse functionality make it a practical choice for anyone looking to maintain their home’s exterior with ease. Whether you’re tackling stubborn stains or simply refreshing outdoor spaces, the UT70127A delivers effective performance every time.
Top Page Image Contents