![](/images/new-backgrounds/1123059/12305917x1.webp)
ASSEMBLY
SILENCER GUARD ASSEMBLY
See Figure 6.
1.Remove silencer guard and two screws from the owner’s kit.
2.Attach the silencer guard to the rear housing.
NOTE: Make sure the bent end of the silencer guard fits securely into the opening of the rear housing.
3.Install two screws.
4.Tighten screws securely.
GRASS DEFLECTOR AND BLADE GUARD USE
See Figure 7.
NOTE: When converting from brushcutter to trimmer, or trimmer to brushcutter, make sure the correct guard/ deflector is being used.
REAR HOUSING
| SILENCER |
TORQUE | GUARD |
WRENCH |
|
| SCREWS |
| BENT END OF |
| SILENCER GUARD |
| OPENING IN REAR |
| HOUSING |
Fig. 6
GRASS DEFLECTOR
FOR TRIMMER USE
BLADE GUARD FOR
BRUSHCUTTER USE
Fig. 7
9