Husqvarna H348SG owner manual Upper Chute See Figs a and 5B, Level Mower Deck

Page 7

5 UPPER CHUTE (See Figs. 5A and 5B)

1.Lower mower to its lowest cutting position.

2.Assemble upper chute by inserting curved end into hole in back of cover.

TIP: Holding upper chute as shown and twisting while installing in cover will help keep the rubber seal in place.

NOTE: Handle carefully so as not to damage full bag indi- cator.

COVER

UPPER CHUTE

FIG. 5A

3.Push in and turn upper chute until it is in line with lower chute.

4.Align the bosses on lower chute with alignment slots on upper chute and slide together.

5.Secure with rubber latch by hooking hole in latch over latch pin.

COVER

FULL BAG INDICATOR

UPPER

 

 

CHUTE

 

 

HANDLE

 

 

LATCH PIN

RUBBER

LATCH

ALIGNMENT

SLOT BOSSES

LOWER CHUTE

FIG. 5B

6 LEVEL MOWER DECK

Be sure deck is properly leveled for best mower perfor- mance. See your tractors owner's manual for instruc- tions.

7

Image 7
Contents Model Number H348SG Product No 73 Inch Mower Grass Catcher II. Slope Operation Safety RulesSafe Operation Practices for Ride-On Mowers General OperationTable of Contents Know Your Grass Catcher Carton ContentsParts Identification Support Assembly See Fig AssemblyRear Drawbar See Fig Lower Chute See Fig Container Mounting See FigLevel Mower Deck Upper Chute See Figs a and 5BTips for Improved Bagging Operation OperationCustomer Responsibilities MAINTENANCE, Service or Adjust MentsBlade Care KEY Part Description Repair Parts