Husqvarna 7021P owner manual Table of Contents

Page 3

•Never refuel the machine indoors.

•Never store the machine or fuel container where there is an open fl ame, spark or pilot light such as a water heater or on other appliances.

•Never fi ll containers inside a vehicle, on a truck or trailer bed with a plastic liner. Always place containers on the ground away from your vehicle before fi lling.

•Remove gas-powered equipment from the truck or trailer and refuel it on the ground. If this is not possible, then refuel such equipment with a portable container, rather than from a gasoline dispenser nozzle.

•Keep the nozzle in contact with the rim of the fuel tank or container opening at all times until fueling is complete. Do not use a nozzle lock-open device.

•If fuel is spilled on clothing, change clothing immedi- ately.

•Never overfi ll fuel tank. Replace gas cap and tighten securely.

V. GENERAL SERVICE

•Never run a machine inside a closed area.

•Never make adjustments or repairs with the engine (motor) running. Disconnect spark plug wire, and keep

wire away from plug to prevent accidental starting.

•Keep nuts and bolts, especially blade attachement bolts, tight and keep equipment in good condition.

•Never tamper with safety devices. Check their proper operation regularly.

•Keep machine free of grass, leaves, or other debris build-up. Clean oil or fuel spillage. Allow machine to cool before storing.

•Stop and inspect the equipment if you strike an object. Repair, if necessary, before restarting.

•Never attempt to make wheel height adjustments while the engine (motor) is running.

•Grass catcher components are subject to wear, dam- age, and deterioration, which could expose moving parts or allow objects to be thrown. Frequently check components and replace with manufacturer’s recom- mended parts, when necessary.

•Mower blade is sharp and can cut. Wrap the blade or wear gloves, and use extra caution when servicing it.

•Do not change the engine governor setting or overspeed the engine.

•Maintain or replace safety and instruction labels, as necessary.

WARNING: This lawn mower is equipped with an internal combustion engine and should not be used on or near any unimproved forest-covered, brush-covered or grass-covered land unless the engine’s exhaust system is equipped with a spark arrester meeting applicable local or state laws (if any). If a spark arrester is used, it should be maintained in effective working order by the operator.

In the state of California the above is required by law (Section 4442 of the California Public Resources Code). Other states may have similar laws. Federal laws apply on federal lands. A spark arrester for the muffl er is available through your nearest authorized service center.

CONGRATULATIONS on your purchase of a new lawn mower. It has been designed, engineered and manufactured to give you the best possible dependability and performance.

Should you experience any problem you cannot easily remedy, please contact your nearest authorized service center. We have competent, well-trained technicians and the proper tools to service or repair this lawn mower.

Please read and retain this manual. The instructions will enable you to assemble and maintain your lawn mower properly. Always observe the “SAFETY RULES”.

SERIAL

NUMBER: _________________________________

DATE OF PURCHASE: _______________________

THE MODELAND SERIAL NUMBERS WILL BE FOUND ON ADECALATTACHED TO THE REAR OF THE LAWN MOWER HOUSING.

YOU SHOULD RECORD BOTH SERIAL NUMBER AND DATE OF PURCHASE AND KEEP IN A SAFE PLACE FOR FUTURE REFERENCE.

PRODUCT SPECIFICATIONS

Gasoline Capacity

1.0 Quarts

and Type:

(Unleaded Regular Only)

 

 

Oil Type (API-SF-SJ):

SAE 10W-30

 

 

Oil Capacity:

18.5 Ounces

 

 

Spark Plug:

NGK BPR6ES (Gap: .030")

 

 

Valve Clearance:

Intake: 0.015 mm

(± 0.04 mm)

Exhaust: 0.020 mm

 

 

Blade Bolt Torque:

35-40 ft. lbs.

CUSTOMER RESPONSIBILITIES

•Read and observe the safety rules.

•Follow a regular schedule in maintaining, caring for and using your lawn mower.

•Follow the instructions under “Maintenance” and “Stor- age” sections of this owner’s manual.

TABLE OF CONTENTS

SAFETY RULES

2-3

PRODUCT SPECIFICATIONS

3

CUSTOMER RESPONSIBILITIES

3

ASSEMBLY

4

OPERATION

5-8

MAINTENANCE SCHEDULE

9

MAINTENANCE

9-11

SERVICE AND ADJUSTMENTS

12

STORAGE

13

TROUBLESHOOTING

14

REPAIR PARTS

16-17

3 WARRANTY

20

Page 2 Page 4
Image 3
Page 2 Page 4
Contents 7021P III. Children Safe Operation Practices for Walk-Behind MowersII. Slope Operation General OperationTable of Contents To Remove Lawn Mower from Carton AssemblyHOW to SET UP Your Lawn Mower To Install AttachmentsMeets Cpsc Safety Requirements OperationKnow Your Lawn Mower Engine Zone Control HOW to USE Your Lawn MowerTo Adjust Cutting Height See Fig Engine SpeedADD Gasoline See Fig Before Starting EngineTo Empty Grass Catcher See Fig ADD OIL See FigMulching Mowing Tips To Stop EngineTo Start Engine See Fig Mowing TipsBefore Each USE MaintenanceLubrication Chart General RecommendationsBlade Care Lawn MowerEngine TiresMuffler CleaningTo Change Engine OIL See Figs AIR Filter See FigRear Deflector Service and AdjustmentsClean Under Drive Cover To Adjust Cutting HeightEngine OIL StorageOther Fuel SystemProblem Cause Correction Troubleshooting PointsService Notes Page KEY Part Description Effective January 1 Policy
Related manuals
Manual 16 pages 52.71 Kb

7021P specifications

The Husqvarna 7021P is a powerful and efficient gas-powered lawn mower that stands out for its robust performance and user-friendly features. Designed for residential use, this mower combines power, precision, and convenience to help homeowners achieve the perfect lawn.

At the heart of the Husqvarna 7021P is a reliable 160cc gas engine, which delivers ample power for cutting through thick grass and tackling uneven terrain. This engine is designed to start easily and provide consistent performance, ensuring that the mower operates smoothly during each mowing session. The 7021P features a 21-inch cutting deck, making it ideal for medium-sized yards, allowing users to cover more ground with fewer passes.

One of the standout features of the Husqvarna 7021P is its 3-in-1 cutting system. This versatile system gives users the option to mulch, rear bag, or side discharge the clippings, offering flexibility based on personal preference and lawn care needs. Mulching is particularly beneficial as it recycles the grass clippings back into the soil, promoting healthy grass growth and reducing waste.

The mower is equipped with a dual-lever height adjustment system, allowing users to easily set the cutting height to their desired level. This feature provides a range of cutting heights, accommodating different grass types and conditions.

Additionally, the Husqvarna 7021P features durable wheels that provide excellent traction and maneuverability. The front wheels are 8 inches, while the rear wheels are 11 inches, allowing for smooth navigation over various terrains. The mower also includes an ergonomically designed handle, which not only enhances user comfort but also folds down for easy storage.

A thoughtful design characteristic of the 7021P is its easy-access fuel tank, which simplifies refueling during use. Moreover, the mower's lightweight construction makes it easy to maneuver and transport, ensuring that mowing is not only efficient but also an enjoyable experience.

In summary, the Husqvarna 7021P is a well-rounded lawn mower that showcases a blend of power, versatility, and convenience. Equipped with a reliable engine, a 3-in-1 cutting system, height adjustment capabilities, and ergonomic features, it is designed to meet the needs of homeowners who seek a reliable tool for maintaining a beautiful lawn. Whether tackling small patches or larger areas, the Husqvarna 7021P is built to deliver excellent results.
Top Page Image Contents